+wanderingwainwrights Posted January 13, 2021 Share Posted January 13, 2021 When downloading a geocache it tells me to download to gpx but how do you transfer it to my gps hope someone can help.thanks Quote Link to comment
+kunarion Posted January 13, 2021 Share Posted January 13, 2021 Just now, wanderingwainwrights said: When downloading a geocache it tells me to download to gpx but how do you transfer it to my gps hope someone can help.thanks Are you connecting by USB to your PC, and does your GPS show up as a drive? If so, you see folders on it called something like "geocaches" and "waypoints". An individual cache page GPX file goes into the "gecoaches" folder. If you unzip a Pocket Query, you may get two files, one for Geocaches and the other for associated waypoints. They need to be placed into their proper folders. Quote Link to comment
+nlhomer1957 Posted January 17, 2021 Share Posted January 17, 2021 Download the Magellan software from their website. When that is installed then find the gpx file on your PC that was downloaded from the Geocaching site. When you are connected to the gps via USB use the Magellan software to install the GPX file to the gps device. Read the help files or download the GC Explorist user manual that is found at: https://service.magellangps.com/M0100/MagMainFrame.aspx Quote Link to comment
+Atlas Cached Posted January 17, 2021 Share Posted January 17, 2021 You only need to unzip any geocaches you download as archives, then copy the *.GPX files to the 'Geocaches' folder in the root directory of the eXplorist GC while it is connected to your computer. If the 'Geocaches' folder is not present, create one. No additional software is necessary, nor is it recommended (K.I.S.S.). 1 Quote Link to comment
+k7da Posted September 14, 2022 Share Posted September 14, 2022 does anyone have a copy of the firmware before 2.15.. something like 1.7. it is a good gps but was better with the previous version of firmware Quote Link to comment
+PeoriaBill Posted December 16, 2022 Share Posted December 16, 2022 (edited) Installing Pocket Queries from Geocaching.com 1. After getting the pocket query results, save the attached zip file to your computer. 2. Unzip the pocket query file. There will be two extracted files, one with a xxxxxxx.gpx filename and one with a xxxxxxx-wpts.gpx filename. 3. Connect your Magellan eXplorist GC receiver to your PC using a USB cable. 4. When prompted, select "Connect to PC". 5. On your PC, open the directory where the files are stored. 6. Drag the file xxxxxxx.gpx to the 'Geocaches' folder and the file xxxxxxx-wpt.gpx to the 'Waypoints' folder. 7. The data will be transferred to your receiver and the geocaches are ready to use. (You need to disconnect or reboot the receiver to exit the "Connect to PC" screen Edited December 16, 2022 by PeoriaBill 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.