+Ramblin_Man Posted November 20, 2020 Share Posted November 20, 2020 The power button on my Montana 650 needs to be repaired. The rubber power button has warn off. I have to use pen to insert a pen to turn the unit on or off. Has anyone had this problem? Can you order parts for this unit? All comments appreciated. 1 Quote Link to comment
+hzoi Posted November 20, 2020 Share Posted November 20, 2020 7 minutes ago, Ramblin_Man said: The power button on my Montana 650 needs to be repaired. The rubber power button has warn off. I have to use pen to insert a pen to turn the unit on or off. Has anyone had this problem? Can you order parts for this unit? All comments appreciated. Same happened on my 600, or whatever the number. I carved off a piece of pencil eraser, to give me something to push down on from the button level that goes down to that little plastic nib inside. And then I covered the hole in the rubber with a piece of duct tape, to keep moisture from getting into the unit. I'm now on my second piece of duct tape after a couple years. It didn't wear out, but the edges eventually came unstuck. 2 2 Quote Link to comment
Keystone Posted November 20, 2020 Share Posted November 20, 2020 I moved this thread from the "How do I...?" forum, which is for website function and feature questions. Quote Link to comment
+Atlas Cached Posted November 20, 2020 Share Posted November 20, 2020 (edited) How are you at DIY repairs? Garmin Montana 600 Back Case Whoops, that's for the 600, you have a 650, and they do not appear to have any 650 back cases at this time. But, they do have this replacement button section if you want to try your hand at that! (they seem to have done an excellent job in their example photo) Edited November 20, 2020 by Atlas Cached Quote Link to comment
+Atlas Cached Posted November 20, 2020 Share Posted November 20, 2020 Can you post a photo showing the case damage fully and clearly? Quote Link to comment
+Atlas Cached Posted November 20, 2020 Share Posted November 20, 2020 3 minutes ago, cerberus1 said: and now it'll wait until I google if this is becoming a normal thing. This has been a 'normal' issue for 'high mileage' Garmin GPSr for more than two decades now.... Where have you been? 1 1 1 Quote Link to comment
+Atlas Cached Posted November 20, 2020 Share Posted November 20, 2020 (edited) 18 minutes ago, cerberus1 said: Please explain "high mileage". I have Garmin GPSr with more than 40K cycles on the power and/or user buttons without tearing or visible damage, so I guess probably devices that have more use than that, or devices with users that do not exercise 'finesse' when cycling those buttons.... 18 minutes ago, cerberus1 said: I know where I've been, thanks. Of course you do. And certainly, much of that time has been here in these forums (based on your 3,207 'Likes' and 12,233 posts.) 18 minutes ago, cerberus1 said: I use a 60csx for hunting, fishing, 4-wheeling, boating, and even geocaching, yet only wore the paint off buttons.. Well now, let's try to stay on topic and not compare apples to oranges. The buttons you reference from your GPSMAP series device are not the same soft rubber over mold that is being discussed in this thread about the Montana 600 power button. Edited November 20, 2020 by Atlas Cached typo 1 Quote Link to comment
+Ramblin_Man Posted November 21, 2020 Author Share Posted November 21, 2020 Thanks for the replies. I will try the eraser fix. If that does not work I will order a new button 1 Quote Link to comment
+cerberus1 Posted November 21, 2020 Share Posted November 21, 2020 Sorry for letting this go OT Ramblin_Man, I deleted my posts... Quote Link to comment
+GrateBear Posted November 22, 2020 Share Posted November 22, 2020 On 11/20/2020 at 7:34 PM, Ramblin_Man said: Thanks for the replies. I will try the eraser fix. If that does not work I will order a new button I did the eraser fix on my Oregon 450. Works like a charm. Can buy a lot of pencil erasers for $38 (including shipping)! 1 Quote Link to comment
+THE CASTOFFS Posted December 18, 2020 Share Posted December 18, 2020 Not sure if this is still active but here goes anyway. I have exactly the same problem and I too am using a ballpoint to operate the switch. I Sourced a new rear case about a year ago but haven't tried changing it yet. It's worth noting that it's not a straight swap. The rear case I've got is just that, no battery contacts, no cradle contacts etc. just a piece of plastic with a rubber switch cover, lens cover. Everything else has to be carefully removed and transferred which is part of the reason I haven't bothered. I'm glad I found this thread. The duct tape and pencil eraser method sound like quite an attractive alternative. I've attached a couple of pictures. Quote Link to comment
+Ramblin_Man Posted December 30, 2020 Author Share Posted December 30, 2020 Thanks for the reply. I have using a pen to start and close the GPS. This is working fine for now. Replacing the rear case appears to be a quite a job. I will leave this as a last resort. Good luck with yours. Quote Link to comment
+Claystalker Posted February 7, 2021 Share Posted February 7, 2021 On 12/18/2020 at 9:30 AM, THE CASTOFFS said: Not sure if this is still active but here goes anyway. I have exactly the same problem and I too am using a ballpoint to operate the switch. I Sourced a new rear case about a year ago but haven't tried changing it yet. It's worth noting that it's not a straight swap. The rear case I've got is just that, no battery contacts, no cradle contacts etc. just a piece of plastic with a rubber switch cover, lens cover. Everything else has to be carefully removed and transferred which is part of the reason I haven't bothered. I'm glad I found this thread. The duct tape and pencil eraser method sound like quite an attractive alternative. I've attached a couple of pictures. I have the same problem with mine. Contacted Garmin and they no longer have parts for these. I looked at purchasing the case, as you did, but decided there was more involved than just switching the case, and I'm an electrician. Didn't want to take the chance of screwing it up and having a useless paperweight when I got done. I am covering the hole with duct tape for now until I decide which direction to go. Quote Link to comment
+mty55 Posted February 7, 2021 Share Posted February 7, 2021 (edited) Same here on an Oregon 300 and an Oregon 650. Pencil eraser and duct tape. Works but still bought a new 750 as my go to other two will be for backup or other activities other than geocaching. Edited February 7, 2021 by mty55 Quote Link to comment
+Maingray Posted March 28, 2021 Share Posted March 28, 2021 I did the pencil eraser trick on my 680t, and an Oregon in the past. It's definitely a Garmin "feature". Quote Link to comment
+BaldEd Posted October 22, 2021 Share Posted October 22, 2021 I found the power button dropped out on my desk a week ago and spied the hole. I just poked it back in the hole and duct taped over it. Gps still works just fine. I reckon it is now good for a few years more service. After reading this forum, I don't think I'll bother trying to get a new case. Quote Link to comment
erdos Posted October 25, 2021 Share Posted October 25, 2021 (edited) It happened to me with my montana 600 over the weekend as well! as I was riding along in a car, part of the rubber covering the button caved in when i pressed the power button and realized that unit didn't turn itself off, then i looked closely and the rubber has torn off and stuck inside the newly formed hole. I contacted Garmin today and they said they no longer service montana 600, but they offer 20% off towards buying a new handheld gps unit. Not sure what i should to do next. Edited October 25, 2021 by erdos Quote Link to comment
kiwitonita Posted January 8, 2022 Share Posted January 8, 2022 This supplier, in the Netherlands, makes parts for other models as well as the Oregon shown in the advert: NEW Replacement Power button rubber for Garmin Oregon 700 750 and other Garmin's. Well worth contacting. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.