+outdoorsoccer Posted September 3, 2020 Share Posted September 3, 2020 Hi all, I was walking a new trail today and happened to see a yellow object secured by pink tape to a tree. I went to get take a closer look and it turns out it is a survey marker? I assume it is temporary, but wanted to see if anyone could provide more detail about it as I have never seen one before. I have attached some pics. Sorry for the orientation. They look correct on my phone, but uploaded strangely. Thank you in advance for any help and/or info. Take care ODS Quote Link to comment
kayakbird Posted September 3, 2020 Share Posted September 3, 2020 What part of the world are you in? That would give a local benchmarker a clue - maybe a temporary point for a cadastral marker having to do with a timber sale or building project. kayakbird Quote Link to comment
+outdoorsoccer Posted September 3, 2020 Author Share Posted September 3, 2020 51 minutes ago, kayakbird said: What part of the world are you in? That would give a local benchmarker a clue - maybe a temporary point for a cadastral marker having to do with a timber sale or building project. kayakbird I’m in North Carolina. The marker was found along the greenway heading away from the tennis courts and passingthe closed playground on your left at the Anne Jones Park in Cary, NC The greenway runs between houses, but the marker was found in a small semi-wooded area. Thank you for your help ODS Quote Link to comment
Bill93 Posted September 3, 2020 Share Posted September 3, 2020 Looks like a reference tie (see words on tag) to a nearby bench mark that is harder to find, or possibly a temporary bench mark itself if the tag was all the crew had to label it with so the words don't really mean it. I see nothing cadastral about it, as it isn't labeled as a property corner might be. If it were for horizontal position measurements on a project, folks around here probably would have called it Control Point CP1. Did you see any evidence of nearby construction? Is this a location where a flood plain elevation certificate might be needed for a nearby building? Quote Link to comment
Bill93 Posted September 3, 2020 Share Posted September 3, 2020 If you are in Cary, do you know Paul, a real estate guy who used to be very active in this forum as PFF? Quote Link to comment
+outdoorsoccer Posted September 3, 2020 Author Share Posted September 3, 2020 6 hours ago, Bill93 said: Looks like a reference tie (see words on tag) to a nearby bench mark that is harder to find, or possibly a temporary bench mark itself if the tag was all the crew had to label it with so the words don't really mean it. I see nothing cadastral about it, as it isn't labeled as a property corner might be. If it were for horizontal position measurements on a project, folks around here probably would have called it Control Point CP1. Did you see any evidence of nearby construction? Is this a location where a flood plain elevation certificate might be needed for a nearby building? I did not see any sign of nearby construction. The tag location was in A semi-wooded location that was in-between already established houses. There was a lot of survey tape around the area. Could be for a flood plain elevation certificate as the area was rather wet. Some of the houses on the left side of the trail were higher up than the houses on the right side of the trail. I tried looking on NGS website, but didn’t see any nearby BMs, but admittedly my iPhone was having a hard time with the website. I’ll try again on the home computer. Thank you both for your help. Take care, ODS Quote Link to comment
+outdoorsoccer Posted September 3, 2020 Author Share Posted September 3, 2020 6 hours ago, Bill93 said: If you are in Cary, do you know Paul, a real estate guy who used to be very active in this forum as PFF? I don’t know Paul, but I have read his logs and found them quite helpful. I think he may have just recently started back caching again as there was a couple of new caches places by a PFF. I may try and reach out to him for some help. Thank you, ODS Quote Link to comment
Z15 Posted September 12, 2020 Share Posted September 12, 2020 (edited) That is Bench Mark #1. An elevation point for some survey job. https://www.berntsen.com/Surveying/Specialty-Markers/BenchTies/ctl/ViewProduct/mid/598/itemID/487 BenchTie - The Vertical Surface Control Point Recessed dimple on top for prism pole High visibility tag for marking data Resections are made instantly and accurately Light weight Pre drill to set in concrete Use in trees or poles as permanent or temporary benchmarks The revolutionary vertical surface control point, BenchTie can be used on trees and poles. BenchTie comes with a high visibility tag for marking data. It is molded around a five-inch (127mm) hardened zinc-coated spike. Other features include a recessed dimple on top and a high-density lightweight casing. Available in high visibility yellow. PS - Its not unusual for some small projects where no vertical control is nearby to use an assumed elevation for cost savings. Also that they are often placed in areas that won't be disturbed so its survives any project work. They are planing or investigating the feasibility of building something nearby I would presume and probably mapped the area. Edited September 13, 2020 by Z15 Quote Link to comment
+outdoorsoccer Posted September 13, 2020 Author Share Posted September 13, 2020 On 9/12/2020 at 5:18 PM, Z15 said: That is Bench Mark #1. An elevation point for some survey job. https://www.berntsen.com/Surveying/Specialty-Markers/BenchTies/ctl/ViewProduct/mid/598/itemID/487 BenchTie - The Vertical Surface Control Point Recessed dimple on top for prism pole High visibility tag for marking data Resections are made instantly and accurately Light weight Pre drill to set in concrete Use in trees or poles as permanent or temporary benchmarks The revolutionary vertical surface control point, BenchTie can be used on trees and poles. BenchTie comes with a high visibility tag for marking data. It is molded around a five-inch (127mm) hardened zinc-coated spike. Other features include a recessed dimple on top and a high-density lightweight casing. Available in high visibility yellow. PS - Its not unusual for some small projects where no vertical control is nearby to use an assumed elevation for cost savings. Also that they are often placed in areas that won't be disturbed so its survives any project work. They are planing or investigating the feasibility of building something nearby I would presume and probably mapped the area. Hi Z15, Funny thing is that I saw 2 more of these tags (no writing on them though) along the Neuse River Trail later on the week after finding the one marked BM#1. Thank you for the information. Take care, ODS Quote Link to comment
ArtMan Posted September 14, 2020 Share Posted September 14, 2020 On 9/3/2020 at 7:07 AM, outdoorsoccer said: I don’t know Paul, but I have read his logs and found them quite helpful. I think he may have just recently started back caching again as there was a couple of new caches places by a PFF. I may try and reach out to him for some help. Years ago (2000s) I enjoyed a great day benchmarking with Paul. He's a gregarious and generous fellow who speaks North Carolina with much more authority than I can muster as he reassured residents who wondered what we were doing that "we're not gonna widen your road, and we're not gonna raise your taxes!" Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.