+Losdelrio Team Posted April 12, 2020 Share Posted April 12, 2020 Hi I have made several designs of minted geocoins up to now, but all of them were thought in 2D. Now I have considered making 3D or relief design but I'm not sure about the procedure so I would like to know some tutorial or tips to get on with it. Thanks in advance. Loki Quote Link to comment
RuideAlmeida Posted April 12, 2020 Share Posted April 12, 2020 13 hours ago, Losdelrio Team said: Now I have considered making 3D or relief design but I'm not sure about the procedure so I would like to know some tutorial or tips to get on with it. Mainly the same thing... but your design need to have levels, gradients and/or shadowed areas, so the 3D can read and give them different thickness. There's a rule... with 3D, no colours except for the metal plattings. But you can mix 2D and 3D in a single coin, also. Quote Link to comment
+Losdelrio Team Posted April 13, 2020 Author Share Posted April 13, 2020 19 hours ago, RuideAlmeida said: Mainly the same thing... but your design need to have levels, gradients and/or shadowed areas, so the 3D can read and give them different thickness. There's a rule... with 3D, no colours except for the metal plattings. But you can mix 2D and 3D in a single coin, also. OK. Does anyone have a sample of a design to take a look? Quote Link to comment
RuideAlmeida Posted April 13, 2020 Share Posted April 13, 2020 2 hours ago, Losdelrio Team said: OK. Does anyone have a sample of a design to take a look? Take a look at some of mine. Quote Link to comment
+Losdelrio Team Posted April 14, 2020 Author Share Posted April 14, 2020 19 hours ago, RuideAlmeida said: Take a look at some of mine. Great! Thank you for sharing! Quote Link to comment
+fox-and-the-hound Posted June 22, 2020 Share Posted June 22, 2020 What software are you utilizing to create the artwork? There are some helpful color mode techniques to getting better 3d images for a mint to use. Quote Link to comment
+Losdelrio Team Posted June 23, 2020 Author Share Posted June 23, 2020 On 6/22/2020 at 2:57 PM, fox-and-the-hound said: What software are you utilizing to create the artwork? There are some helpful color mode techniques to getting better 3d images for a mint to use. Usually Photoshop Quote Link to comment
+fox-and-the-hound Posted July 2, 2020 Share Posted July 2, 2020 Try changing color mode to LAB to make the greyscale. It uses color temperature so you get MUCH better accuracy on your greyscale images for the mint. Switch to LAB mode. Command click the Lightness layer in your color separations. Paintbucket white onto a new layer. Add solid black under that layer. Flatten everything back down and switch back to RGB. Try a few different pictures and compare to a simple desaturate to see the difference. Quote Link to comment
+Losdelrio Team Posted July 5, 2020 Author Share Posted July 5, 2020 Thank you. I'll follow your tip. 19/5000 19/5000 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.