+TeamRabbitRun Posted February 3, 2020 Share Posted February 3, 2020 ...but I've never come across it. I hit a nano on Sunday with a log scroll. I unscrewed the cap and dumped it out into my hand. The scroll was encased in a piece of a sturdy drinking straw that had been cut to length then slit up one side. To replace the log, roll it as best as you can and wrap the straw around it. Held snugly, fell right out of its tube and fits right back in without expanding or getting the ends crushed. Sure, tell me it's the most-common thing out there; I can take it. Kudos to CO "dakaamsach" for showing me a new simple trick. 4 Quote Link to comment
RuideAlmeida Posted February 3, 2020 Share Posted February 3, 2020 2 minutes ago, TeamRabbitRun said: The scroll was encased in a piece of a sturdy drinking straw... Found some of those in Nîmes... around 10 years ago. I was amazed also. 1 Quote Link to comment
+cerberus1 Posted February 3, 2020 Share Posted February 3, 2020 We've seen those many years ago. For bisons too. Most ended up missing when it became a pain-in-the-can for a lot of folks to fit it all in (having to take parts of the log away to fit with the straw), or they shot off like on a springboard, and not able to be retrieved (in the water). Quote Link to comment
+L0ne.R Posted February 3, 2020 Share Posted February 3, 2020 This video shows the idea, but in this case the straw is the container. Quote Link to comment
+L0ne.R Posted February 3, 2020 Share Posted February 3, 2020 And here it's used to hold the log.... Quote Link to comment
+TeamRabbitRun Posted February 3, 2020 Author Share Posted February 3, 2020 35 minutes ago, L0ne.R said: And here it's used to hold the log.... Yep - that's what I was talking about. The one I found was much smaller. I would say bison tube-sized, but it wasn't a bison tube. What it WAS, I can't say: spoilers! As for the video above - Wow! I think that's great, but I'd be afraid that a cacher would shove it through! Also, outside of caching I just might clean up that litter. Quote Link to comment
+kunarion Posted February 3, 2020 Share Posted February 3, 2020 4 hours ago, TeamRabbitRun said: I hit a nano on Sunday with a log scroll. I unscrewed the cap and dumped it out into my hand. The scroll was encased in a piece of a sturdy drinking straw that had been cut to length then slit up one side. I have some thick Teflon tubing that fits inside my 50ml Micros, and I cut it half the length of the log roll. And similar ones for the bison tube hides. It’s cool and all, but the tube tends to vanish at times. Quote Link to comment
+HunterandSamuel Posted February 4, 2020 Share Posted February 4, 2020 17 hours ago, TeamRabbitRun said: To replace the log, roll it as best as you can and wrap the straw around it. Held snugly, fell right out of its tube and fits right back in without expanding or getting the ends crushed. So that's what that tube thingy is for! Thank you for sharing this! Writing down straws on my shopping list. Quote Link to comment
+hal-an-tow Posted February 4, 2020 Share Posted February 4, 2020 plastic straws 1 Quote Link to comment
+HunterandSamuel Posted February 4, 2020 Share Posted February 4, 2020 17 hours ago, L0ne.R said: This video shows the idea, but in this case the straw is the container. This is a cool video! A clear straw will hide better I'm guessing but harder to find. Quote Link to comment
+frostengel Posted February 4, 2020 Share Posted February 4, 2020 19 hours ago, TeamRabbitRun said: Sure, tell me it's the most-common thing out there; I can take it. I don't think it is. :-) In my opinion the most-common thing should be not to hide nano (or even smaller) caches... The cache shown in the video is great as a puzzling high difficulty cache but most tiny caches are just annoying and tiny without purpose... Quote Link to comment
+Seeker_Knight Posted February 4, 2020 Share Posted February 4, 2020 23 hours ago, TeamRabbitRun said: ...but I've never come across it. I hit a nano on Sunday with a log scroll. I unscrewed the cap and dumped it out into my hand. The scroll was encased in a piece of a sturdy drinking straw that had been cut to length then slit up one side. To replace the log, roll it as best as you can and wrap the straw around it. Held snugly, fell right out of its tube and fits right back in without expanding or getting the ends crushed. Sure, tell me it's the most-common thing out there; I can take it. Kudos to CO "dakaamsach" for showing me a new simple trick. I never ran into one done this way. GREAT IDEA, AND THANKS FOR SHARING it! Seeker_Knight Quote Link to comment
+NYPaddleCacher Posted February 4, 2020 Share Posted February 4, 2020 5 hours ago, HunterandSamuel said: This is a cool video! A clear straw will hide better I'm guessing but harder to find. considering how many signature would fit on a log sheet that size, a harder to find cache would be a good thing. Quote Link to comment
+niraD Posted February 5, 2020 Share Posted February 5, 2020 7 hours ago, NYPaddleCacher said: considering how many signature would fit on a log sheet that size, a harder to find cache would be a good thing. And some of us enjoy searching for caches that are a challenge to find. Quote Link to comment
+ras_oscar Posted February 6, 2020 Share Posted February 6, 2020 I've seen a few of those recently. Great idea. I've also seen a pin cut to length equal to the width of the log and glued in place. Stubborn logs can be teased out by applying a magnet to the pin and telecsoping it out. I keep a home made twilling tool in my caching bag for stubborn nano logs, both removing and rerolling. Straighten a small paperclip. Cut a piece of 1/4" dowel about 1" long. Drill a hole 1/4" from one end and groove from the hole to the end so the paperclip lies flat. Insert the paperclip in the hole and straighten both ends parallel, lying into the grooves. Wrap the dowel in duct tape to secure and cut the paperclip off flush about 1" beyond the end of the dowel. grasp the end of the paperclip and gently twist until the ends twist together into a single column. Untwist so a piece of paper can be inserted between. When you open the cache and the log won't tap out, insert the end of the tool into the hole, twist and pull. If you can, insert the paperclip with the end of the log between the jaws and twist to close them together. If you cant get an end of the log, insert the paperclip into the center void and twist in the opposite direction to open the jaws while pulling. When you're done insert the end of the log between the paperclip jaws and twist to roll up the log. Sounds a lot more involved than it actually is. 1 Quote Link to comment
+JL_HSTRE Posted February 13, 2020 Share Posted February 13, 2020 I often see bison logs in a plastic straw section or in a small plastic vial inner container (sometimes both). For preforms, a good local trick is to staple one end of some small notebook paper to a straw or tape one end of a logsheet to a thin wood craft stick, then wind the paper around the straw or stick. This helps keep the paper from accidentally getting wedged in the bottom of the preform. 2 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.