+Korichnovui Posted August 26, 2019 Share Posted August 26, 2019 Hello, I have a nifty cache setup that I inherited, which is a metal canister off the geocaching shop (specifically this one) which is then placed into a log. The log has an appropriate-sized cylindrical hole drilled into it and a magnetic circular plate at the bottom to help hold the canister in place. The log can then be placed "in nature". I had this for one of my hides and then discovered that when the log gets wet, the wood swells and hold the canister so tightly that you can't get it out and can't unscrew the top. I took it home and left it in my garage for a couple months and now the wood is relaxed and the canister easily goes in/out. Are there any ideas on how to deal with this and salvage the cache setup idea of hiding the canister in the log? Quote Link to comment
+Touchstone Posted August 26, 2019 Share Posted August 26, 2019 My first thought would be to drill a larger hole to accommodation a plastic or metal sleeve, which could prevent the cache container from getting squeezed. 1 2 Quote Link to comment
+cerberus1 Posted August 26, 2019 Share Posted August 26, 2019 Agree with Touchstone. A slightly larger hole (you could just rasp it out a bit too) and a cylinder placed inside to fight it. You say there's a magnet already at the bottom, so should still work fine. We had a bunch in a series sorta like that (logs, bricks, etc...), but glued matchstick holders in the drilled hole. We wanted them to stay put. 2 Quote Link to comment
+Camroo Posted August 26, 2019 Share Posted August 26, 2019 so ive had this issue with one of my gadget caches, its a birdhouse that you pull out the perch, but when it rains it swells, usually it doesnt get too bad and there isnt that many cachers who find it when its wet. but i saw one when i visited somewhere else where they used a metal perch for it and it didnt swell so that may help your issue. but if not, as much as it sucks to add a note just saying that you dont reccomend getting it after its rained, it might be your only choice. i also believe you might be able to put a finish on the wood. 1 Quote Link to comment
+niraD Posted August 26, 2019 Share Posted August 26, 2019 4 hours ago, Camroo said: i also believe you might be able to put a finish on the wood. For something that's going to be outdoors, a finish is just going to slow down the expansion. It's best to build the wooden components so the inevitable expansion doesn't cause problems. 2 Quote Link to comment
+AlisonandBob2740 Posted August 30, 2019 Share Posted August 30, 2019 Can I ask what size , did you put this has? Quote Link to comment
+bflentje Posted September 13, 2019 Share Posted September 13, 2019 On 8/26/2019 at 10:34 AM, Korichnovui said: Hello, I have a nifty cache setup that I inherited, which is a metal canister off the geocaching shop (specifically this one) which is then placed into a log. The log has an appropriate-sized cylindrical hole drilled into it and a magnetic circular plate at the bottom to help hold the canister in place. The log can then be placed "in nature". I had this for one of my hides and then discovered that when the log gets wet, the wood swells and hold the canister so tightly that you can't get it out and can't unscrew the top. I took it home and left it in my garage for a couple months and now the wood is relaxed and the canister easily goes in/out. Are there any ideas on how to deal with this and salvage the cache setup idea of hiding the canister in the log? I thought those containers were aluminum.. so the magnet works? The gaskets on these don't last long in my experience. :-( Quote Link to comment
+Korichnovui Posted September 15, 2019 Author Share Posted September 15, 2019 On 9/12/2019 at 5:00 PM, bflentje said: I thought those containers were aluminum.. so the magnet works? The gaskets on these don't last long in my experience. :-( The magnet works ... weakly. I think you're right about the gaskets. We will have to monitor. I have spares. To solve my problem, I shaved off a 45 degree angle of wood all around the mouth of the hole. If the canister gets stuck in the wood again, at least this time the cap will be unimpeded and can be screwed off. Quote Link to comment
+Korichnovui Posted September 15, 2019 Author Share Posted September 15, 2019 On 8/30/2019 at 8:22 AM, Alison2740 said: Can I ask what size , did you put this has? Small. Quote Link to comment
+K13 Posted September 15, 2019 Share Posted September 15, 2019 16 hours ago, Korichnovui said: Small. So a finder can expect to be able to drop a trackable inside? 2 Quote Link to comment
+cerberus1 Posted September 15, 2019 Share Posted September 15, 2019 (edited) 16 hours ago, Korichnovui said: Small. Curious, what made you think this was a small ? I did see your link to the site... They even say, "Make your micro hides a little bigger with the Small Cylinder Geocache!" and state that they recommend you use micro log or "double-wide" micro strips too. We'd have a couple, and look at these just as the site says... a "little bigger" micro, so curious. Edited September 15, 2019 by cerberus1 Quote Link to comment
+niraD Posted September 15, 2019 Share Posted September 15, 2019 37 minutes ago, K13 said: So a finder can expect to be able to drop a trackable inside? The container description says "big enough to hold some small SWAG and trackables". 27 minutes ago, cerberus1 said: Curious, what made you think this was a small ? The dimensions listed in the container description put its internal volume at almost 200ml. According to the Help Center article Cache container sizes, "Small containers are 100 milliliters to 1 liter. " 2 Quote Link to comment
+Korichnovui Posted September 16, 2019 Author Share Posted September 16, 2019 5 hours ago, K13 said: So a finder can expect to be able to drop a trackable inside? I put a trackable in it when I hid it, so I should say so. Check out TB8JBMY to see a few pics and get a sense of the size. Sorry for formatting, on my phone and copy/paste made it weird. 1 Quote Link to comment
+Korichnovui Posted September 16, 2019 Author Share Posted September 16, 2019 4 hours ago, cerberus1 said: Curious, what made you think this was a small ? I did see your link to the site... They even say, "Make your micro hides a little bigger with the Small Cylinder Geocache!" and state that they recommend you use micro log or "double-wide" micro strips too. We'd have a couple, and look at these just as the site says... a "little bigger" micro, so curious. I didn’t read that description on the website. I simply had the container in my hands. I think if you held one you would reasonably be able to call it a small. 1 Quote Link to comment
+Harry Dolphin Posted September 16, 2019 Share Posted September 16, 2019 3 minutes ago, Korichnovui said: I didn’t read that description on the website. I simply had the container in my hands. I think if you held one you would reasonably be able to call it a small. When I started caching, small was described as "will hold a sandwich". That cache is a micro. 1 Quote Link to comment
+niraD Posted September 16, 2019 Share Posted September 16, 2019 26 minutes ago, Harry Dolphin said: When I started caching, small was described as "will hold a sandwich". That cache is a micro. For years, the dividing line between micro and small has been 100ml: "Micro containers are less than 100 milliliters.[...] Small containers are 100 milliliters to 1 liter." 1 Quote Link to comment
+Korichnovui Posted September 16, 2019 Author Share Posted September 16, 2019 (edited) 3 hours ago, Harry Dolphin said: When I started caching, small was described as "will hold a sandwich". That cache is a micro. For me it's always been "about the size of an apple" or alternatively "can fit some swag and trackables" like it says on the Geocaching.com website. This container can. I'll keep the designation as "small". Anyway, I think the point has been made. Some folks are bringing up the issue of "size creep" or whatever it is which really belongs in another thread - I think I remember seeing one somewhere in the general forum before? This container seems to be functional, and I really appreciate the advice I received in considering how to make it so. I'm personally not going to discuss the size any more in this thread. Edited September 16, 2019 by Korichnovui 1 Quote Link to comment
+barefootjeff Posted September 16, 2019 Share Posted September 16, 2019 (edited) 8 hours ago, Harry Dolphin said: When I started caching, small was described as "will hold a sandwich". That cache is a micro. This is a 200ml Sistema container, so it's twice the volume of what the Help Centre page considers to be the minimum for a Small, but I'd still be pretty hungry even after eating both the sandwiches that would fit inside it. Something big enough to hold a decent-sized sandwich would have to be close to being a Regular (minimum 1 litre). Edited September 16, 2019 by barefootjeff 1 3 1 Quote Link to comment
+VAVAPAM Posted September 16, 2019 Share Posted September 16, 2019 (edited) Agreeing with a couple of suggestions: Definitely make the hole wider. I know you've spent quite some time drying it out, but you probably need to get it wet again to verify the correct circumference ... or else just make it more than just wide enough. Lining is a good idea, too. Construction adhesive (like Liquid Nails) or wood glue would help keeping it in place. Stuff a bunch of newspaper in the hole to add pressure until it dries. Not sure how big the log/stick is, or whether the container leaves enough head space, but you could make a plug to fit the top of the hole. Perhaps attach fishing line between the bottom of the plug and the container. Perhaps attach fishing line from the top of the plug and near the top of the stick/log ... or maybe just a grab-ring attached with a staple nail (fence staple). Edited September 16, 2019 by VAVAPAM newspaper 2 Quote Link to comment
+niraD Posted September 16, 2019 Share Posted September 16, 2019 5 hours ago, barefootjeff said: Something big enough to hold a decent-sized sandwich would have to be close to being a Regular (minimum 1 litre). Keep in mind that most sandwich containers aren't designed to hold "a decent-sized sandwich" that would satisfy an adult's appetite. They seem designed to hold a basic PB&J sandwich for a kid's lunch. And the ones I've seen generally have a volume around half a litre. The typical example containers generally seem to fit in the middle of a size range. For micro, a 35mm film can has a volume of about 35ml (yes, I measured one a while back), which is in the middle of the 0ml to 100ml range. For small, a sandwich keeper has a volume of about 500ml, which is in the middle of the 100ml to 1L range. Most ammo cans (say, .30 cal or .50 cal) seem to be in the range 4-10L, which is in the middle of the 1L to 20L range. The exception is the large size, where the 5 gallon bucket example is at the bottom of the range. Anyway, since these example containers are in the middle of their size ranges, it stands to reason that some in that range will be larger and some will be smaller. Also, back in the day, decon boxes were also examples of a typical small container. They're smaller than sandwich keepers, so I guess you'd be even hungrier if you tried to pack your lunch in one. 1 Quote Link to comment
+VAVAPAM Posted September 16, 2019 Share Posted September 16, 2019 (edited) Just another thought: Of course, it again depends on the size of that stick/log .... Perhaps drill holes all the way through the cavity to allow ventilation, then use wire mesh (screen wire - fiberglass might last longer although it tears more easily) instead of solid metal/plastic to line the cavity (still using construction adhesive/newspaper). The screen would keep most bugs out and still allow for ventilation. (Is it obvious yet that I'm liking this setup and thinking about how to build one myself? With your permission.) Edited September 16, 2019 by VAVAPAM screened Quote Link to comment
+cerberus1 Posted September 16, 2019 Share Posted September 16, 2019 20 minutes ago, VAVAPAM said: (Is it obvious yet that I'm liking this setup and thinking about how to build one myself? With your permission.) The downside that we experienced with a series of this type hide, was sometimes they'd be pitched out of the way (looking for a container, not realizing that's it ;-) and most got stepped on a coupla times. - So make 'em as close to (fill in the blank)-proof as you can. 1 1 Quote Link to comment
+VAVAPAM Posted September 17, 2019 Share Posted September 17, 2019 16 hours ago, cerberus1 said: The downside that we experienced with a series of this type hide, was sometimes they'd be pitched out of the way (looking for a container, not realizing that's it ;-) and most got stepped on a coupla times. - So make 'em as close to (fill in the blank)-proof as you can. Ah, good point; thanks for the insight! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.