Jump to content
Sign in to follow this  
Followers 1
rklmbl

All Geocaches in a State

Recommended Posts

Does anyone know how to get ALL the caches in a particular state listed? When you go to Filters and type in a state name, it says: 1000 of XX,XXX caches in state. You scroll down and it continues to load and takes forever and finally loads 1000 caches. There is NO way that I can find to get it to load other caches in the state. You can eventually get to the caches that have been published recently and then click on Placed Date and it will show 1000 caches published since 2000. But if you wanted to look at caches placed in, for example, May 2010, you cannot do that. It used to be easy to find caches: Search by State, then scroll over 200 at a time until you get to the month you want to look at. Took only a few seconds. Anyone have any suggestions?

 

Also the new format change is very difficult to scroll through...and see more than a small handful of caches at a time.

Share this post


Link to post

I don't think it can be done using the new search engine. You could run a PQ until you have all the caches (or the specific ones you're looking for) in the state and go that way but you're probably going to have to go outside of the site to get what you're looking for.

Share this post


Link to post

Does anyone know how to get ALL the caches in a particular state listed?

 

At the moment this workaround still works

For Texas

http://www.geocaching.com/seek/nearest.aspx?State_id=44'>http://www.geocaching.com/seek/nearest.aspx?State_id=44

 

For other states replace 44 by the state id of the state you want to look at (not necessarily a state of the US).

For Arkansas use 4

http://www.geocaching.com/seek/nearest.aspx?State_id=4

Edited by cezanne

Share this post


Link to post

Does anyone know how to get ALL the caches in a particular state listed?

 

At the moment this workaround still works

For Texas

http://www.geocaching.com/seek/nearest.aspx?State_id=44'>http://www.geocaching.com/seek/nearest.aspx?State_id=44

 

For other states replace 44 by the state id of the state you want to look at (not necessarily a state of the US).

For Arkansas use 4

http://www.geocaching.com/seek/nearest.aspx?State_id=4

 

Thank you so very much. I appreciate your help so much. Hopefully the workaround will continue to work.

Can you tell me how you got to the workaround in the first place. So I will know what to do in the future or what to do if someone else asks me what to do. Thank you again.

Edited by rklmbl

Share this post


Link to post

Project-gc will give whole states but has a limit of 10000 so not sure how many states that would cover. And you can get a gpx file of it.

Edited by Walts Hunting

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  
Followers 1

×
×
  • Create New...