+rklmbl Posted March 13, 2015 Share Posted March 13, 2015 Does anyone know how to get ALL the caches in a particular state listed? When you go to Filters and type in a state name, it says: 1000 of XX,XXX caches in state. You scroll down and it continues to load and takes forever and finally loads 1000 caches. There is NO way that I can find to get it to load other caches in the state. You can eventually get to the caches that have been published recently and then click on Placed Date and it will show 1000 caches published since 2000. But if you wanted to look at caches placed in, for example, May 2010, you cannot do that. It used to be easy to find caches: Search by State, then scroll over 200 at a time until you get to the month you want to look at. Took only a few seconds. Anyone have any suggestions? Also the new format change is very difficult to scroll through...and see more than a small handful of caches at a time. Quote Link to comment
+coachstahly Posted March 13, 2015 Share Posted March 13, 2015 I don't think it can be done using the new search engine. You could run a PQ until you have all the caches (or the specific ones you're looking for) in the state and go that way but you're probably going to have to go outside of the site to get what you're looking for. Quote Link to comment
cezanne Posted March 13, 2015 Share Posted March 13, 2015 (edited) Does anyone know how to get ALL the caches in a particular state listed? At the moment this workaround still works For Texas http://www.geocaching.com/seek/nearest.aspx?State_id=44'>http://www.geocaching.com/seek/nearest.aspx?State_id=44 For other states replace 44 by the state id of the state you want to look at (not necessarily a state of the US). For Arkansas use 4 http://www.geocaching.com/seek/nearest.aspx?State_id=4 Edited March 13, 2015 by cezanne Quote Link to comment
+rklmbl Posted March 13, 2015 Author Share Posted March 13, 2015 (edited) Does anyone know how to get ALL the caches in a particular state listed? At the moment this workaround still works For Texas http://www.geocaching.com/seek/nearest.aspx?State_id=44'>http://www.geocaching.com/seek/nearest.aspx?State_id=44 For other states replace 44 by the state id of the state you want to look at (not necessarily a state of the US). For Arkansas use 4 http://www.geocaching.com/seek/nearest.aspx?State_id=4 Thank you so very much. I appreciate your help so much. Hopefully the workaround will continue to work. Can you tell me how you got to the workaround in the first place. So I will know what to do in the future or what to do if someone else asks me what to do. Thank you again. Edited March 13, 2015 by rklmbl Quote Link to comment
+Walts Hunting Posted March 13, 2015 Share Posted March 13, 2015 (edited) Project-gc will give whole states but has a limit of 10000 so not sure how many states that would cover. And you can get a gpx file of it. Edited March 13, 2015 by Walts Hunting Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.