Barrikady Posted April 20, 2012 Share Posted April 20, 2012 http://www8.garmin.com/support/download_details.jsp?id=5679 Changes made from version 3.97 to 3.98: Added ability to remove the red pin while panning the map Added ability to set a via point while navigating a calculated route Added new route activity types Improved GPS response at low speeds Improved camera white balance Improved Arabic fonts Fixed issue with preserving routes imported from Basecamp (identical maps required) Fixed Where To? > Address bug that would prevent finding an address Fixed issue related to not ignoring first screen press after backlight times out Fixed shutdown related to a shortcut that locks a specific orientation Problems with this beta software may be reported to MontanaBeta@garmin.com Quote Link to comment
yogazoo Posted April 20, 2012 Share Posted April 20, 2012 (edited) Dude, the Montana just keeps getting better and better. I love to see "Added" in the change log! The Montana is pulling further and further away from the rest of the pack. I used an Oregon 450 at work the other day and I hated it. Some screenshots of the new features: Removal of the red pin is facilitated by tapping the "x" on the display bar along the top. New routing activities. Routing "Via" option. Edited April 20, 2012 by yogazoo Quote Link to comment
kb6ooc Posted April 20, 2012 Share Posted April 20, 2012 Dude, the Montana just keeps getting better and better. I love to see "Added" in the change log! The Montana is pulling further and further away from the rest of the pack. I used an Oregon 450 at work the other day and I hated it. Yes indeed, "Added" is a great thing! Those are all useful features too. While the Montana has an off course alarm for a straight line in marine mode, I am hoping to see Garmin add an off course alarm for a non-straight route (such as a hiking trail) so I know when I've made a bad turn at a junction. That aside, I am still not able to assign a function to the double-click of the power button. I wanted to assign LOCK/UN-LOCK (the screen) to that double-click. I reported it to Garmin and provided them a video. A fix didn't make it into 3.98 or 3.97 so they must be still thinking about it. I'd like to hear Garmin's thoughts on the new routing modes and the philosophy behind them. I guess its probably as simple as they calculate the trip time more accurately for the mode you're in. I'm curious about mountaineering versus hiking though. Maybe I have to be going vertical for mountaineering mode - climbing El Capitan in Yosemite perhaps. Anyway, I'm glad Garmin is still willing to add features. I've owned 4 Garmin's now (GPS45, III+, 60CS, and now Montana). The old ones are sitting in a drawer. I loved my 60CS but always wanted a larger one (with similar features) that I could use in my Tahoe. The Nuvi's were cool but dumbed down so much I hated the thought of buying one. Garmin ABSOLUTELY NAILED IT with the Montana. All the coolness of the 60CS (and its successors) and the Nuvi for basic street driving, and then some more after that! No company has ever read my mind like this. I'd marry the Montana in a split second (just need one or two things fixed, and that off course thing above and I'll be looking for a chapel in Vegas). Quote Link to comment
+splashy Posted April 20, 2012 Share Posted April 20, 2012 The most important nobody is talking about. It does NOT recalculate anymore when importing a route from Basecamp. Quote Link to comment
+taeke Posted April 20, 2012 Share Posted April 20, 2012 What's important for a person, varies For me, I am still missing a feature to have the geocache description open up at exactly the same place where I left. It's nice they add some many features, but something which is really very irritating to people who try to do paperless multi-caching, isn't implemented. That makes me Quote Link to comment
+Catch Posted April 20, 2012 Share Posted April 20, 2012 After upgrading to 3.98, the Where To, Go, magenta line, start point is fixed to the position where I started to walk from. The activity type selected is Direct Routing. Before 3.98, the magenta line has always been going from the current position to the destination. I find no way to change this. Is this a bug that was introduced with the new route activity types or have I overlooked something ?. Quote Link to comment
+c_dog Posted April 20, 2012 Share Posted April 20, 2012 After upgrading to 3.98, the Where To, Go, magenta line, start point is fixed to the position where I started to walk from. The activity type selected is Direct Routing. Before 3.98, the magenta line has always been going from the current position to the destination. I find no way to change this. Is this a bug that was introduced with the new route activity types or have I overlooked something ?. Noticed this too. Haven't figured a way around it, but while I was looking, I noticed that routing can now be done with multiple destinations with 'set via points' like has been available on the higher end nüvi for a years now. Quote Link to comment
+mamoreb Posted April 20, 2012 Share Posted April 20, 2012 I have also spent some time trying to "release" the direct routing magenta line from its starting point, but I can't find a way. Quote Link to comment
Barrikady Posted April 20, 2012 Author Share Posted April 20, 2012 "Added ability to remove the red pin while panning the map." Oh, I really like this little addition to the Montana firmware. I also liked "Added ability to toggle map between Track Up and North Up by touching the North arrow" that was added in 3.96 beta. Garmin has been refining the firmware and making the operating experience, dare I say it, more elegant. Thank you Garmin. Quote Link to comment
WrongwayUK Posted April 21, 2012 Share Posted April 21, 2012 The most important nobody is talking about. It does NOT recalculate anymore when importing a route from Basecamp. Is this a plus point in that your hard work setting a route in Basecamp isn't messed up when you import it? Quote Link to comment
+taeke Posted April 23, 2012 Share Posted April 23, 2012 Buggybuggywuggy When I disconnect the device from my computer, it starts to reboot and hangs in the boot-process. Power button doesn't work, so batteries need to be removed. Quote Link to comment
team tisri Posted April 23, 2012 Share Posted April 23, 2012 The most important nobody is talking about. It does NOT recalculate anymore when importing a route from Basecamp. That's a big one for me. At present I use track logs and tell my Montana to follow the track log but that means I have to watch the log as it gives me no warning at all if I'm approaching a junction. On a long ride recently I went off course a couple of times as I had pretty much zoned out and wasn't really paying much attention to the GPS. What I'd really like to see is the Grade indicator being more accurate at cycling speeds. It's a little irritating to be struggling up a hill that's gradually getting steeper only to find the Montana tells me it's a 1% downhill. Quote Link to comment
+mamoreb Posted April 23, 2012 Share Posted April 23, 2012 Is anyone having problems with map selections not being stored in this version? In a given profile, I disable all maps except one. Whenever I restart or come back from another profile, several maps are once again enabled. Does this happen to any of you? Quote Link to comment
+Z_Statman Posted April 23, 2012 Share Posted April 23, 2012 Buggybuggywuggy When I disconnect the device from my computer, it starts to reboot and hangs in the boot-process. Power button doesn't work, so batteries need to be removed. Same here but find that if I hold down the power button longer my M650 will shut down Quote Link to comment
+Atlas Cached Posted April 23, 2012 Share Posted April 23, 2012 Is anyone having problems with map selections not being stored in this version? In a given profile, I disable all maps except one. Whenever I restart or come back from another profile, several maps are once again enabled. Does this happen to any of you? This is a long time bug that has yet to be corrected by Garmin. See Bug 02. Please report to MontanaBeta@Garmin.com and insist they continue work on this error. The same issue was present on the Oregon series for a very long time, and eventually solved. I do not know why they have yet to solve it for the Montana. Quote Link to comment
kb6ooc Posted April 23, 2012 Share Posted April 23, 2012 (edited) Is anyone having problems with map selections not being stored in this version? In a given profile, I disable all maps except one. Whenever I restart or come back from another profile, several maps are once again enabled. Does this happen to any of you? I don't recall having this problem in the past. I just check my automobile profile and it has my "City Select" map enabled and nothing else. I went to my hiking profile and it has my 24K topo map enabled, but nothing else. SEEMS okay for me. On a related note, I've seen some people talk about routing avoidances. Some new routing activities were added with 3.98. The routing avoidances have been updated too. Depending on the routing activity selected, certain avoidances are shown or not shown. The problem is whatever you select/deselect does not seem to "stick". Go back a page and go forward again to the list of avoidances and they are unchanged. This has been reported to montanabeta. Perhaps there's some relation to what you are seeing with the maps (although I don't seem to be having that problem). EDIT: Found a fix for the avoidances thing from another forum (http://advrider.com/forums/showthread.php?p=18523577). Here's what they said: I found a workaround. Go to Setup >> Routing >> Avoidance Setup, uncheck the selection, then select it again (checkmark is visible). Do this for each avoidance. Go back to Routing menu, and when you return to Avoidance Setup, you’re preference is correct! Edited April 23, 2012 by kb6ooc Quote Link to comment
+mamoreb Posted April 24, 2012 Share Posted April 24, 2012 I did not notice this problem before, but it could be that it was simply my preferred map selection that "stuck". Now I'm stuck with a file with walking paths on top of my driving map, which causes route calculation errors. I get this every time I change to the automotive profile (every time I place the GPS in the cradle). Very annoying! Quote Link to comment
yogazoo Posted April 24, 2012 Share Posted April 24, 2012 v3.98 is, for me, the most unstable version yet in terms of random shutdowns. Nothing in particular, no sequence to note, simply unstable. I applaud the improvements but having to frequently restart my unit is a PITA. Quote Link to comment
+taeke Posted April 25, 2012 Share Posted April 25, 2012 Before 3.98, the magenta line has always been going from the current position to the destination. I find no way to change this. Is this a bug that was introduced with the new route activity types or have I overlooked something ?. Just read on the Dutch forum that someone got a reply from Garmin that this is a bug, and should be fixed in a next release. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.