Jump to content
Sign in to follow this  
Followers 0
K4NNW

Garmin 62ST APRS questions

Recommended Posts

Like several others, I ended up buying the 'wrong-way' 90-degree power/data cable for the Oregon/Colorado series, and tried to wire it up to my Kenwood D7. So far, I have yet to coax one ounce of serial data out of this thing, despite setting the unit to NMEA in/out and wiring up the cable properly. Testing it with a multimeter shows that I get +4.8V steady on the white (serial data in) wire with the yellow (serial data out) wire being the ground. I get about +6V steady on the green (data ground) wire with the yellow wire being the ground. I didn't figure these voltages would be steady,

I tried this both with my D7 and with my HamHUD to make sure that the D7's GPS port wasn't bad. I've read that it may require an RS-232 to TTL level converter. First of all, is that converter required? If not, where did I screw up?

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0

×