+The Waldo's Posted August 19, 2010 Share Posted August 19, 2010 (edited) I went to do the 3.74 Beta upgrade today and everything seemed going fine The unit started up and was showing the green upgrade bar then restarted only to be frozen at the GARMIN name on the screen. It wont shut down by it self and after an hour I pulled the batteries and tried it again with the same results. Any suggestions? Thanks. BTW I went right to the Oregon 450 page at the Garman site for the upgrade so I know downloaded for the right unit. Edited August 19, 2010 by The Waldo's Quote Link to comment
+sv_ted Posted August 19, 2010 Share Posted August 19, 2010 Isn't 3.85 for the x00 series? Quote Link to comment
+The Waldo's Posted August 19, 2010 Author Share Posted August 19, 2010 Isn't 3.85 for the x00 series? Sorry I ment version 3.74 I edted my first post. Quote Link to comment
+Cacheoholic Posted August 19, 2010 Share Posted August 19, 2010 1st try reloading the firmware. If that doesn't work use the recovery method used in this topic. Quote Link to comment
+The Waldo's Posted August 19, 2010 Author Share Posted August 19, 2010 1st try reloading the firmware. If that doesn't work use the recovery method used in this topic. Another dumb question? Where do I find the firmware? The was no cd in the box? Thanks Again Quote Link to comment
+Cacheoholic Posted August 19, 2010 Share Posted August 19, 2010 I guess I should have said 3.74 beta software. Quote Link to comment
+splashy Posted August 20, 2010 Share Posted August 20, 2010 (edited) Go here look under versions for the software. http://garminoregon.wikispaces.com/ Also follow this http://garminoregon.wikispaces.com/message...w/home/26107475 Scroll down to posting re: Oregon x50 software version 3.74 Beta available madbin Aug 15, 2010 12:19 am Or you might wanna try After several battery pulls, reinserting and turning it back on, only to have it stay on the triangle screen, I finally left batteries out, then connected it to computer and after a few seconds unit asked if I wanted it to go into mass storage mode. I pressed no then it started up like normal. Edited August 21, 2010 by splashy Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.