+Tree Toad Posted August 16, 2010 Share Posted August 16, 2010 Little help here please. I have a new Garmin GPSmap 62S and City Nav NA 2011 on micro SD card. I have installed the card correctly and the gps knows its installed but I cannot get it to display ANY mapping at all. Not the base map or the City Nav NA 2011. I didnt have a problem with my GPS map 60 but the new one is defeating me and Garmin is responding VERY slowly to my email for help. Im sure someone out there can help me out. Thanks. Tree Toad. Quote Link to comment
+DragonsWest Posted August 16, 2010 Share Posted August 16, 2010 Little help here please. I have a new Garmin GPSmap 62S and City Nav NA 2011 on micro SD card. I have installed the card correctly and the gps knows its installed but I cannot get it to display ANY mapping at all. Not the base map or the City Nav NA 2011. I didnt have a problem with my GPS map 60 but the new one is defeating me and Garmin is responding VERY slowly to my email for help. Im sure someone out there can help me out. Thanks. Tree Toad. Just a quick question: Under Setup>Maps>Map Information Select Map what is Enabled? Try enabling everything and then selectively disable maps until you see what you want. The other answer is to pose this question in the GPS Technology forum. Quote Link to comment
+Tree Toad Posted August 16, 2010 Author Share Posted August 16, 2010 Little help here please. I have a new Garmin GPSmap 62S and City Nav NA 2011 on micro SD card. I have installed the card correctly and the gps knows its installed but I cannot get it to display ANY mapping at all. Not the base map or the City Nav NA 2011. I didnt have a problem with my GPS map 60 but the new one is defeating me and Garmin is responding VERY slowly to my email for help. Im sure someone out there can help me out. Thanks. Tree Toad. Just a quick question: Under Setup>Maps>Map Information Select Map what is Enabled? Try enabling everything and then selectively disable maps until you see what you want. The other answer is to pose this question in the GPS Technology forum. I have enabled each one but can only enable them one at a time. Doesnt seem to matter as neither one shows up. Quote Link to comment
Motorcycle_Mama Posted August 16, 2010 Share Posted August 16, 2010 Moving to the GPS and Technology forum. Quote Link to comment
+humboldt flier Posted August 17, 2010 Share Posted August 17, 2010 Little help here please. I have a new Garmin GPSmap 62S and City Nav NA 2011 on micro SD card. I have installed the card correctly and the gps knows its installed but I cannot get it to display ANY mapping at all. Not the base map or the City Nav NA 2011. I didnt have a problem with my GPS map 60 but the new one is defeating me and Garmin is responding VERY slowly to my email for help. Im sure someone out there can help me out. Thanks. Tree Toad. Same boat here. Quote Link to comment
+Don_J Posted August 17, 2010 Share Posted August 17, 2010 Little help here please. I have a new Garmin GPSmap 62S and City Nav NA 2011 on micro SD card. I have installed the card correctly and the gps knows its installed but I cannot get it to display ANY mapping at all. Not the base map or the City Nav NA 2011. I didnt have a problem with my GPS map 60 but the new one is defeating me and Garmin is responding VERY slowly to my email for help. Im sure someone out there can help me out. Thanks. Tree Toad. Same boat here. I don't have a 62 to experiment with, but I've learned that the maps on my 60 have certain priorities over each other. If I want to display my topo, I have to turn off the City Nav Quote Link to comment
+ryan3295 Posted August 17, 2010 Share Posted August 17, 2010 Do you have any maps showing from the sd card at all? Will your computer recognize the sd card if you connect the gps to the computer? This has happened to me before with my Oregon 450, turned out to simply be that the sd card was not correctly inserted even though the tab was in the locked position. Quote Link to comment
+Redwoods Mtn Biker Posted August 17, 2010 Share Posted August 17, 2010 Email isn't a great way to communicate with Garmin support. If you can't resolve it any other way, I'd set aside time for a phone call. Quote Link to comment
+TheRedArmy Posted August 17, 2010 Share Posted August 17, 2010 (edited) my city nav wouldn't NOT show up in the 62s when i had it either. i had TOPO USA, BASEMAPS, IBYCUS and CITYNAV and from what i remember, then NAV kept saying it was LOCKED, when i fact it was NOT. the SD card was inserted and it would show TOPO, but the NAV maps would not show as being on the card, even though they transfered ok from mapsource. Edited August 17, 2010 by brucered Quote Link to comment
+humboldt flier Posted August 18, 2010 Share Posted August 18, 2010 Ditto for the street nav Micro SD card ... a Garmin product ( not a knock off ). Two 62s units with two City nav, cards. >>>>>>>>>>>> nothing shows up. Any clues? Quote Link to comment
lalittle Posted August 18, 2010 Share Posted August 18, 2010 Ditto for the street nav Micro SD card ... a Garmin product ( not a knock off ). Two 62s units with two City nav, cards. >>>>>>>>>>>> nothing shows up. Any clues? So it's always the micro SD version of CN that has this problem, correct? Can anyone confirm whether or not the DVD version of CN works with the 62, or if ANYBODY with the mSD version has gotten it to work? Thanks, Larry Quote Link to comment
+TheRedArmy Posted August 18, 2010 Share Posted August 18, 2010 Ditto for the street nav Micro SD card ... a Garmin product ( not a knock off ). Two 62s units with two City nav, cards. >>>>>>>>>>>> nothing shows up. Any clues? So it's always the micro SD version of CN that has this problem, correct? Can anyone confirm whether or not the DVD version of CN works with the 62, or if ANYBODY with the mSD version has gotten it to work? Thanks, Larry i have the dvd version of 2010.###### something and i put only MB on a microsd card thru mapsourse along with some topos, still didn't work. Quote Link to comment
lalittle Posted August 18, 2010 Share Posted August 18, 2010 So can anyone confirm that they have been able to get ANY version of City Nav to work on the 62 series? So far, I have not been able to find a report of someone successfully putting CN on a 62 series. Thanks, Larry Quote Link to comment
+lghtspeed1 Posted August 18, 2010 Share Posted August 18, 2010 I also had the same problem with my new 62s and a City Nav microSD card. When I turned on the 62s I got the message "Cannot Unlock Maps." I confirmed that it was inserted and "locked" in correctly, but still the same message came up. I emailed Garmin and two days later their reply was to download the newest firmware for the 62s and if that didn't correct the problem they suggested the card was defective and to return it. I had already updated the firmware as soon as I bought the unit, but I then checked for a newer version. I had the newest version already. So, I returned the SD card and got a refund. Then I went to REI, bought the DVD map version and it works fine. Would have liked the SD card better if it had worked, but I loaded the entire US and parts of Mexico and Canada and it took about 30 minutes. Quote Link to comment
+Wienerdog Posted August 18, 2010 Share Posted August 18, 2010 I put the micro SD version of CN 2011.10 in my 62s and have had no problems. It works with SW V2.4 and now V2.44 Quote Link to comment
+MikieP Posted August 19, 2010 Share Posted August 19, 2010 GPSmap 62cs and City Nav NT 2011.10 data card, both purchased yesterday, both working fine. Quote Link to comment
+Mobcacher Posted August 19, 2010 Share Posted August 19, 2010 I use the OSM Maps with no trouble on my 62s Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.