+The Wobbly Club Posted May 3, 2010 Share Posted May 3, 2010 Hi, Anyone having similar problems to me, in that Windows 7 will not recognise my GPSr Garmin 60CSx. When connecting using GSAK it will not recognise the connection. What have I done wrong? Is it me or Windows 7? Grateful for any help. Colin Quote Link to comment
+Birdman-of-liskatraz Posted May 3, 2010 Share Posted May 3, 2010 (edited) Hi, Anyone having similar problems to me, in that Windows 7 will not recognise my GPSr Garmin 60CSx. When connecting using GSAK it will not recognise the connection. What have I done wrong? Is it me or Windows 7? Grateful for any help. Colin It's you! Mines working perfectly with Windows 7 (64 bit version) and with GSAK... Have you installed the Garmin drivers? Download from here Edited May 3, 2010 by Birdman-of-liskatraz Quote Link to comment
+dino-irl Posted May 3, 2010 Share Posted May 3, 2010 I've never needed to use any additional drivers but it could be that it didn't install properly. If you look under the hardware list when it's plugged in you might see it with a ? beside it. You could also try plugging it into a different USB port and it might re-install. Quote Link to comment
+Chaotica_UK Posted May 6, 2010 Share Posted May 6, 2010 I had a similar problem but wierdly it only started following the latest GSAK update. Ended up running a Windows update which collected the drivers for me. Quote Link to comment
+drdick&vick Posted May 6, 2010 Share Posted May 6, 2010 I have no problems with my 60Cx, it connects to Geocahce Log and to the Garmin Dashbourd with no problems at all, even interfaces with Memory Map ok. Quote Link to comment
+garpal Posted August 23, 2011 Share Posted August 23, 2011 I am having the same problem with the same GPSr. I've tried numerous things and nothing works. Any real solutions out there? JP Hi, Anyone having similar problems to me, in that Windows 7 will not recognise my GPSr Garmin 60CSx. When connecting using GSAK it will not recognise the connection. What have I done wrong? Is it me or Windows 7? Grateful for any help. Colin Quote Link to comment
+Graculus Posted August 24, 2011 Share Posted August 24, 2011 Couple of things to check. Click the Start Button and in the Search box type in device manager When the dialogue box opens, scroll down to Universal Serial Bus Controllers and look for a USB Mass Storage device connected. This dialogue updates 'live' so if you plug something in and then unplug it you'll see it removed or detected. Try it with the GPS and also any other USB device such as memory stick or USB disk drive. Here is an example from my PC with a USB drive connected. Next thing to check is disk management to see that Windows has seen the 'drive' and assigned it a drive letter. Click the Start Button again and in the Search box type in disk management In the example below you can see my USB disk drive has been allocated drive letter E. If you do plug USB devices into your PC Windows sometimes gets confused with drive letters and tries to assign a letter it's used with a previous device. You can use disk management to assign a unique letter to the GPS so it always gets assigned it when you plug it in. If the device does appear in both places but you still can't connect to it then I'm not sure what it might be. To prove it isn't a fault on the GPS connect it to another PC and see if it works there. Chris Graculus Volunteer UK Reviewer for geocaching.com UK Geocaching Information & Resources website www.follow-the-arrow.co.uk Geocaching.com Knowledge Books Quote Link to comment
team tisri Posted August 24, 2011 Share Posted August 24, 2011 Hi, Anyone having similar problems to me, in that Windows 7 will not recognise my GPSr Garmin 60CSx. When connecting using GSAK it will not recognise the connection. What have I done wrong? Is it me or Windows 7? Grateful for any help. Colin I'm using Windoze 7 (32 bit) and a 60CSx and it works just fine. I don't use GSAK though. Quote Link to comment
+borderlinecase Posted February 10, 2013 Share Posted February 10, 2013 Hi, Anyone having similar problems to me, in that Windows 7 will not recognise my GPSr Garmin 60CSx. When connecting using GSAK it will not recognise the connection. What have I done wrong? Is it me or Windows 7? Grateful for any help. Colin I'm using Windoze 7 (32 bit) and a 60CSx and it works just fine. I don't use GSAK though. I tried the method Graculus recommended. No response in the Device Manager. Hummm - could my cable be messed up? Grabbed another one of the same design I had for a camera. Bingo - drivers intalled and everything's up and running. They sure sold scrawny cables with those units Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.