+Brantflakes Posted May 2, 2010 Share Posted May 2, 2010 A few months ago, there was a thread about making micro containers from two bottle caps and the neck of a soda bottle. I made like 20 of them after I finally figured out the instructions. Now, I decided to make an instructable on it in order to clarify how to make them. Check it out! http://www.instructables.com/id/Micro-Geocache-Container/ As you can see, I attributed the idea to Odie442, who sent me the instructions by email. Quote Link to comment
+thedeadpirate Posted May 3, 2010 Share Posted May 3, 2010 Very nice, clear instructions. *** This post was intended as an encouragement. Quote Link to comment
knowschad Posted May 3, 2010 Share Posted May 3, 2010 Very nice, clear instructions. *** This post was intended as an encouragement. I agree. Gotta make me some of those one of these days. *** This post was intended as reinforcement for a happy, upbeat, positive, and green post by GeoBain. Thank you, GeoBain, for your helpful encouragement. It was both helpful, and encouraging. Quote Link to comment
+kywaterfowler Posted May 3, 2010 Share Posted May 3, 2010 I make these all them time. You may find out that the hot glue may not hold up over time. I use this and everything seems to be doing well with all the ones that I have put out. Loctite Repair Extreme Quote Link to comment
+bittsen Posted May 3, 2010 Share Posted May 3, 2010 I made mine a different way. No "glue" was used. There will be no degradation of the adhesive because there isn't any "adhesive". I also added a little extra as part of the process. Quote Link to comment
+kingsting Posted May 4, 2010 Share Posted May 4, 2010 Good old Odie! He has those things hidden all around my area. They seem to be holding up well too. Quote Link to comment
+yawppy Posted May 4, 2010 Share Posted May 4, 2010 Cool.. Another idea I will utilize one day. I have a cache (GC1H7TG) with just the caps, one from a coke bottle, and one from a water bottle, used a Dremmell tool, and duct tape, folks love it, the simplest thing, and they love it. I'm a chef, and since I've started caching, I tend to use plastics I salvage from the bin at work. I just recently learned of what I call a "Bouncing Betty", You take a cap from a McCormick Salt/Pepper shaker, (Black cap) and then get a hold of some of the caps that come on those beverage syrups, (Coke, soda the fountain syrups), a little electrical tape, the log rolls up in the fountain cap, and they close nice and snug, and well looks like a mini Land mine. I also have a "Bleach/Radiator" Cap micro, grab one of them, and usually a small juice cap will snap in place, as well as some other caps. Well as you can tell, I have lot of time on my hands while at work, (LOL not really) but at home, have lot of plastics to play with. Glad to hear I am not the only cap head, or CITO head, and can not wait to give this a shot. Quote Link to comment
+brslk Posted May 4, 2010 Share Posted May 4, 2010 (edited) Knowing a little bit about Plastics I will chime in here. I would think that the best way to make a bottle cap cache container would be to cut the bottle off below the collar on both bottles, sand or file the underside of the collars flat and use Crazy glue to fit them together. The reason for using Crazy glue is that it actually eats/melts/breaks down the Plastic and fuses them together rather than gluing them. The larger the surface area you are fusing the better the hold. Edited May 4, 2010 by brslk Quote Link to comment
+bittsen Posted May 4, 2010 Share Posted May 4, 2010 Knowing a little bit about Plastics I will chime in here. I would think that the best way to make a bottle cap cache container would be to cut the bottle off below the collar on both bottles, sand or file the underside of the collars flat and use Crazy glue to fit them together. The reason for using Crazy glue is that it actually eats/melts/breaks down the Plastic and fuses them together rather than gluing them. The larger the surface area you are fusing the better the hold. Crazy glue does NOT bond plastic well. At least not many plastics if it bonds any. If you want to bond like plastics together you need either heat or a solvent. (friction and radio waves will work as well but most people don't have the sufficient equipment to use those and it's still just using heat). Quote Link to comment
+Mosaic55 Posted May 4, 2010 Share Posted May 4, 2010 I made mine a different way. No "glue" was used. There will be no degradation of the adhesive because there isn't any "adhesive". I also added a little extra as part of the process. The way I tried, I needed the glue to achieve a waterproof container. I painted them dark brown for "camo". I also added a magnet to the sealed end before putting it together. What "extra" did you add? I'm just not sure how the hot glue will hold up in hot weather or in direct sunlight. They were fun to make, but I kinda got carried away and made more than I'll ever hide myself (I'm not that found of nano/micro caches). Quote Link to comment
+Anno Lynke Posted May 4, 2010 Share Posted May 4, 2010 I just made a container with pvc I dont want to get off subject so dont tell me how good or bad that is I was thinking the pvc glue would work wonders fro the bottle cap micros since it actually melts and bonds the plastic Quote Link to comment
+bittsen Posted May 4, 2010 Share Posted May 4, 2010 I made mine a different way. No "glue" was used. There will be no degradation of the adhesive because there isn't any "adhesive". I also added a little extra as part of the process. The way I tried, I needed the glue to achieve a waterproof container. I painted them dark brown for "camo". I also added a magnet to the sealed end before putting it together. What "extra" did you add? I'm just not sure how the hot glue will hold up in hot weather or in direct sunlight. They were fun to make, but I kinda got carried away and made more than I'll ever hide myself (I'm not that found of nano/micro caches). Hot glue will work short term but for long term I used PVC cement. When I added it to the bottom part I added a 3/8 in neodymium magnet to the puddle of PVC cement. It's not going anywhere. The PVC cement is a solvent cement so it molecularly bonds the plastic(s) together. I just made a container with pvc I dont want to get off subject so dont tell me how good or bad that is I was thinking the pvc glue would work wonders fro the bottle cap micros since it actually melts and bonds the plastic Exactly. Using VC cement is what will work best. The plastics are dissimilar but it will work fine. Quote Link to comment
+Cptnodegard Posted May 4, 2010 Share Posted May 4, 2010 Nice tutorial, but I hate Instructables.com with a passion. Worse web design than that is hard to find. Guess they want you to pay to be a premium member to get something half usable Quote Link to comment
+brslk Posted May 5, 2010 Share Posted May 5, 2010 Knowing a little bit about Plastics I will chime in here. I would think that the best way to make a bottle cap cache container would be to cut the bottle off below the collar on both bottles, sand or file the underside of the collars flat and use Crazy glue to fit them together. The reason for using Crazy glue is that it actually eats/melts/breaks down the Plastic and fuses them together rather than gluing them. The larger the surface area you are fusing the better the hold. Crazy glue does NOT bond plastic well. At least not many plastics if it bonds any. If you want to bond like plastics together you need either heat or a solvent. (friction and radio waves will work as well but most people don't have the sufficient equipment to use those and it's still just using heat). Crazy glue DOES indeed bond Plastics together very well (I should have added "Instant Crazy glue"). It contains acetone which is a solvent. Try it for yourself. Pour a little nail polish remover into the bottom of a PET bottle and see what happens. Quote Link to comment
+bittsen Posted May 5, 2010 Share Posted May 5, 2010 Crazy glue DOES indeed bond Plastics together very well (I should have added "Instant Crazy glue"). It contains acetone which is a solvent. Try it for yourself. Pour a little nail polish remover into the bottom of a PET bottle and see what happens. Crazy glue isn't acetone... ~LOL~ Why use nail polish remover for my test? I have pure acetone at my disposal (among many other chemicals). Quote Link to comment
+cx1 Posted May 5, 2010 Share Posted May 5, 2010 So what happens to the bottle? Quote Link to comment
+Knight2000 Posted May 5, 2010 Share Posted May 5, 2010 I have used the adhesive Lexel for this with great results. It has worked for every application I have tried so far including neodymium to plexi-glass. Quote Link to comment
+bittsen Posted May 5, 2010 Share Posted May 5, 2010 So what happens to the bottle? Goes in the recycle bin Quote Link to comment
knowschad Posted May 5, 2010 Share Posted May 5, 2010 (edited) Crazy glue DOES indeed bond Plastics together very well (I should have added "Instant Crazy glue"). It contains acetone which is a solvent. Try it for yourself. Pour a little nail polish remover into the bottom of a PET bottle and see what happens. You might want to check this site out: http://www.chemistryquestion.com/English/Q...recycling.html: In part: A plastic bottle is made of a polymer called “polyethylene terephthalate (PET)”. Approximately 100 molecules of terephthalic acid (TPA) and ethylene glycol (EG, structure: HO-CH2-CH2-OH) link alternately to form this compound’s structure. PET cannot be dissolved in acetone. However... Edited May 5, 2010 by knowschad Quote Link to comment
+Brantflakes Posted May 5, 2010 Author Share Posted May 5, 2010 Thanks for all the encouragement. I added a step to show the new gluing techniques that everyone has brought up. Great input. I've never used anything more than hot glue on them so I may try out some of the others. Would epoxy be any good? Quote Link to comment
+brslk Posted May 5, 2010 Share Posted May 5, 2010 (edited) Crazy glue DOES indeed bond Plastics together very well (I should have added "Instant Crazy glue"). It contains acetone which is a solvent. Try it for yourself. Pour a little nail polish remover into the bottom of a PET bottle and see what happens. Crazy glue isn't acetone... ~LOL~ Why use nail polish remover for my test? I have pure acetone at my disposal (among many other chemicals). I don't see anywhere in my post where I said Crazy glue was acetone. As for the nail polish comment.. it is more accessible to the general public these days. It is about 90% acetone. I have no problems buying it being a former boat builder and fiberglass tech with a degree in.. ah.. nm... Heck.. I could call Dow Corning and order a 55 Gallon drum of it. Edited May 5, 2010 by brslk Quote Link to comment
+brslk Posted May 5, 2010 Share Posted May 5, 2010 Crazy glue DOES indeed bond Plastics together very well (I should have added "Instant Crazy glue"). It contains acetone which is a solvent. Try it for yourself. Pour a little nail polish remover into the bottom of a PET bottle and see what happens. You might want to check this site out: http://www.chemistryquestion.com/English/Q...recycling.html: In part: A plastic bottle is made of a polymer called “polyethylene terephthalate (PET)”. Approximately 100 molecules of terephthalic acid (TPA) and ethylene glycol (EG, structure: HO-CH2-CH2-OH) link alternately to form this compound’s structure. PET cannot be dissolved in acetone. However... Your link is dead. Quote Link to comment
+joespaz Posted May 5, 2010 Share Posted May 5, 2010 They were fun to make, but I kinda got carried away and made more than I'll ever hide myself (I'm not that found of nano/micro caches). I started to make one last night with a juice bottle and two lids. I realized that they are fun to make and they are big enough to use as "C.I.T.O. Kit" containers. I will add a grocery bag and a sandwich makers glove and have a nice kit for less then 5 cents! Maybe the small micro sized containers can be used as stages of a multi? Or for an event game? Anyone else have some ideas on how we can use micro containers, but not hide the traditional micros? Quote Link to comment
+Knight2000 Posted May 5, 2010 Share Posted May 5, 2010 You might want to check this site out: http://www.chemistryquestion.com/English/Q...recycling.html Your link is dead. Fixed. Quote Link to comment
+Knight2000 Posted May 5, 2010 Share Posted May 5, 2010 I started to make one last night with a juice bottle and two lids. I realized that they are fun to make and they are big enough to use as "C.I.T.O. Kit" containers. I will add a grocery bag and a sandwich makers glove and have a nice kit for less then 5 cents! Maybe the small micro sized containers can be used as stages of a multi? Or for an event game? Anyone else have some ideas on how we can use micro containers, but not hide the traditional micros? We have used the film cans with a bag for CITO. IMO it is a waste as hardly anyone CITO's. When I check on caches we have that have been out for years the CITO film can is usually still there despite the area accumulating garbage. Instead you could make the containers and leave them as swag. I have one of these caches dubbed by some as "large nanos". It has a magnet inside and is attached to some metal stairs about 9'-10' up. Quote Link to comment
+bittsen Posted May 6, 2010 Share Posted May 6, 2010 Crazy glue DOES indeed bond Plastics together very well (I should have added "Instant Crazy glue"). It contains acetone which is a solvent. Try it for yourself. Pour a little nail polish remover into the bottom of a PET bottle and see what happens. Crazy glue isn't acetone... ~LOL~ Why use nail polish remover for my test? I have pure acetone at my disposal (among many other chemicals). I don't see anywhere in my post where I said Crazy glue was acetone. As for the nail polish comment.. it is more accessible to the general public these days. It is about 90% acetone. I have no problems buying it being a former boat builder and fiberglass tech with a degree in.. ah.. nm... Heck.. I could call Dow Corning and order a 55 Gallon drum of it. OK, you said Krazy Glue CONTAINS acetone... which I'm pretty sure it doesn't. And nail polish REMOVER is 70% acetone according to the last label I read. (I admit to being without nail polish remover at the moment). Quote Link to comment
+Jumpin' Jack Cache Posted May 6, 2010 Share Posted May 6, 2010 (I admit to being without nail polish remover at the moment). Thus ending the gender ambiguity once and for all! ***This post is purely in jest, playing on prior speculation concerning bittsen's gender. It is in no way meant to imply any stereotype about any gender in any way. Quote Link to comment
+tzipora Posted May 6, 2010 Share Posted May 6, 2010 Crazy glue DOES indeed bond Plastics together very well (I should have added "Instant Crazy glue"). It contains acetone which is a solvent. Try it for yourself. Pour a little nail polish remover into the bottom of a PET bottle and see what happens. Crazy glue isn't acetone... ~LOL~ Why use nail polish remover for my test? I have pure acetone at my disposal (among many other chemicals). I don't see anywhere in my post where I said Crazy glue was acetone. As for the nail polish comment.. it is more accessible to the general public these days. It is about 90% acetone. I have no problems buying it being a former boat builder and fiberglass tech with a degree in.. ah.. nm... Heck.. I could call Dow Corning and order a 55 Gallon drum of it. OK, you said Krazy Glue CONTAINS acetone... which I'm pretty sure it doesn't. And nail polish REMOVER is 70% acetone according to the last label I read. (I admit to being without nail polish remover at the moment). It doesn't. Acetone actually REMOVES Krazy Glue, according to their website. Quote Link to comment
knowschad Posted May 6, 2010 Share Posted May 6, 2010 Crazy glue DOES indeed bond Plastics together very well (I should have added "Instant Crazy glue"). It contains acetone which is a solvent. Try it for yourself. Pour a little nail polish remover into the bottom of a PET bottle and see what happens. You might want to check this site out: http://www.chemistryquestion.com/English/Q...recycling.html: In part: A plastic bottle is made of a polymer called "polyethylene terephthalate (PET)". Approximately 100 molecules of terephthalic acid (TPA) and ethylene glycol (EG, structure: HO-CH2-CH2-OH) link alternately to form this compound's structure. PET cannot be dissolved in acetone. However... Your link is dead. Probably just the colon after the ".html", but no matter. The key point I was trying to make was this: "PET cannot be dissolved in acetone." Quote Link to comment
knowschad Posted May 6, 2010 Share Posted May 6, 2010 Your link is dead. RIP, I guess. Quote Link to comment
+brslk Posted May 6, 2010 Share Posted May 6, 2010 Crazy glue DOES indeed bond Plastics together very well (I should have added "Instant Crazy glue"). It contains acetone which is a solvent. Try it for yourself. Pour a little nail polish remover into the bottom of a PET bottle and see what happens. Crazy glue isn't acetone... ~LOL~ Why use nail polish remover for my test? I have pure acetone at my disposal (among many other chemicals). I don't see anywhere in my post where I said Crazy glue was acetone. As for the nail polish comment.. it is more accessible to the general public these days. It is about 90% acetone. I have no problems buying it being a former boat builder and fiberglass tech with a degree in.. ah.. nm... Heck.. I could call Dow Corning and order a 55 Gallon drum of it. OK, you said Krazy Glue CONTAINS acetone... which I'm pretty sure it doesn't. And nail polish REMOVER is 70% acetone according to the last label I read. (I admit to being without nail polish remover at the moment). It doesn't. Acetone actually REMOVES Krazy Glue, according to their website. I will now back outta this thread and leave the internet Plastic Engineers to discuss how certain Plastics react to Acetone. I guess I wasted my time going to University. I could have learned all I needed to know by reading it online! Quote Link to comment
+bittsen Posted May 6, 2010 Share Posted May 6, 2010 I will now back outta this thread and leave the internet Plastic Engineers to discuss how certain Plastics react to Acetone. I guess I wasted my time going to University. I could have learned all I needed to know by reading it online! It's been a long time since I studied plastics in school. But I do know my cyanoacrylate (AKA Krazy Glue) http://en.wikipedia.org/wiki/Cyanoacrylate Quote Link to comment
+Wooden Cyclist Posted May 6, 2010 Share Posted May 6, 2010 I make these all them time. You may find out that the hot glue may not hold up over time. I use this and everything seems to be doing well with all the ones that I have put out. Loctite Repair Extreme That's the adhesive that I have used on my bottle cap containers. It works well, but I have had two fail. It looks like it didn't have complete coverage of the adhesive in the critical areas. Quote Link to comment
+power69 Posted May 6, 2010 Share Posted May 6, 2010 Nice tutorial, but I hate Instructables.com with a passion. Worse web design than that is hard to find. Guess they want you to pay to be a premium member to get something half usable Agree. pay just to get it all on one page is lame. however theres lots of good stuff on that site. - nice clear instructions though and a unlimited source of caps[if you drink lots of soda] Quote Link to comment
+Mosaic55 Posted May 6, 2010 Share Posted May 6, 2010 nice clear instructions though and a unlimited source of caps[if you drink lots of soda] It doesn't have to be soda (or pop as we say around here). Plastic caps from half liter drinking water bottles work great. Quote Link to comment
+Brantflakes Posted May 7, 2010 Author Share Posted May 7, 2010 Would epoxy work as the adhesive? Also, how have people camoed these? Quote Link to comment
+DENelson83 Posted May 8, 2010 Share Posted May 8, 2010 Hmmm... How interesting that just one day after this thread was started, a cache of this kind was hidden in my area. Wow! Quote Link to comment
+ohmerfam Posted May 10, 2010 Share Posted May 10, 2010 i can't quite make out the details of the process. Do i have to be a member of that site to get larger views of the process? Quote Link to comment
knowschad Posted May 10, 2010 Share Posted May 10, 2010 I'm no expert on gluing PET plastics, but I did find a very thorough discussion on the subject on a magician's forum. Several people actually wrote to the adhesive manufacturers for advice. This is probably worthwhile reading for anybody interested in this subject: http://www.themagiccafe.com/forums/viewtop...57&forum=26 Quote Link to comment
+ohmerfam Posted May 10, 2010 Share Posted May 10, 2010 The glue needed to make these waterproof is my main concern. Chemistry is not my strong point, so i will be watching this thread to see if any intelligent soul finds the perfect adhesive. Quote Link to comment
+Brantflakes Posted May 10, 2010 Author Share Posted May 10, 2010 To view all the steps, just click on the little thumbnails at the top of the page of the instructable. However, to get them all on one page you do have to sign up for the website. Luckily, that's free too and I use it a lot. Quote Link to comment
+ohmerfam Posted May 10, 2010 Share Posted May 10, 2010 Thanks! For a minute there i thought i had to pay, but i went back and noticed the FREE option at the bottom of the page. Quote Link to comment
+Knight2000 Posted May 11, 2010 Share Posted May 11, 2010 This is really simple. An instructable seems like overkill. Take 2 plastic bottles.bottles. 1. Remove one cap. (Recycle the rest of the bottle.) 2. Take the other bottle and cut along the line as shown in the picture. Keep the top and recycle the rest. 3. Glue the lid onto the open bottle end. Use the adhesive of your choice per discussion here. We have one like this. I stuck a magnet on the inside and hid it about 9' up. Quote Link to comment
+Vater_Araignee Posted May 12, 2010 Share Posted May 12, 2010 I'm no expert on gluing PET plastics, but I did find a very thorough discussion on the subject on a magician's forum. Several people actually wrote to the adhesive manufacturers for advice. This is probably worthwhile reading for anybody interested in this subject: GAAAAAAAAA NOOOOOOOOOOOOOOO! Quote Link to comment
+ohmerfam Posted May 12, 2010 Share Posted May 12, 2010 Thanks Knight. Vater, NO, what? Quote Link to comment
+Vater_Araignee Posted May 12, 2010 Share Posted May 12, 2010 Thanks Knight. Vater, NO, what? There is information in that forum that I posted and would rather not get past working magicians and dabblers that still like watching performance. Quote Link to comment
+ohmerfam Posted May 12, 2010 Share Posted May 12, 2010 Ah, understood. I am a dabbler in coin magic/closeup, myself. Quote Link to comment
+Mosaic55 Posted May 12, 2010 Share Posted May 12, 2010 Also, how have people camoed these? I painted some of them. I used Rustoleum for Plastic spray paint. ( I tried Krylon Fusion and had trouble with it crazing when applying the second coat. I see someone on that magic board said the same thing). With the Rustoleum, I used a first coat of the green plastic paint and a second layer of Rustoleum brown camoflage paint. I left a couple of the containers outside in the weather and they went through a couple of thunderstorms without leaking, the paper inside stayed dry. Liberal application of hot glue worked well to seal cap on the cut end of the bottle. I just don't know how the hot glue will hold up in temperature extremes. I used "high temperature" mini glue sticks. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.