+yabetterduk Posted March 16, 2010 Share Posted March 16, 2010 anyone know how access tide data for garmin gps map 60csx? It does not show how in the owners manual but, the discription says it can. I have tried without sucess. A little help would be greatly appreciated. THANKS Quote Link to comment
+coggins Posted March 16, 2010 Share Posted March 16, 2010 (edited) You might have to load the tide data, here's the US tidepoints: LINK Main Menu Find Marine Tide Station Edited March 16, 2010 by coggins Quote Link to comment
snowfleurys Posted March 16, 2010 Share Posted March 16, 2010 Not sure you would have these on a 60. On my 76 I can 'pan to coast, / find / marine points / tide station / select one from the list'. Tide stations for the US is built-in; Garmin did have a file on there website which included tide stations for some or all of Canada. Quote Link to comment
+coggins Posted March 16, 2010 Share Posted March 16, 2010 I didn't know these were part of the unit's software (at least they aren't in the eTrex line). I posted the link to Garmin's US Tide charts that will work with MapSource in my first response. Quote Link to comment
+yabetterduk Posted March 16, 2010 Author Share Posted March 16, 2010 (edited) I didn't know these were part of the unit's software (at least they aren't in the eTrex line). I posted the link to Garmin's US Tide charts that will work with MapSource in my first response. I will give the link a try. Thanks alot! Edited March 16, 2010 by yabetterduk Quote Link to comment
+yabetterduk Posted March 16, 2010 Author Share Posted March 16, 2010 Garmin advertises that the map 60csx is pre loaded with - tide data - but the specs show that it will not recieve - tide charts -??? E mailed garmin to have them explain it Quote Link to comment
+yabetterduk Posted March 17, 2010 Author Share Posted March 17, 2010 Garmin tech support sent my tide data for the Map 60csx this morning. Just finished loading it up. Seems the data was left out of the newer models. But, its in there now! Go Garmin! Quote Link to comment
+coggins Posted March 18, 2010 Share Posted March 18, 2010 Garmin tech support sent my tide data for the Map 60csx this morning. Just finished loading it up. Seems the data was left out of the newer models. But, its in there now! Go Garmin! What exactly did they send you? A software update of some type or a gmapsupp.img file to place on your datacard? I was under the impression that the data was on the datacard that came with the unit as a transparent map file. If so, this would get overwritten by sending new maps to the unit. At least this is how it works with the eTrex units, except that they don't come with the data loaded as they don't come with a datacard. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.