+Rock-hopper Posted December 8, 2009 Share Posted December 8, 2009 Hi, I've upgraded from Garin 60 to the wonderful Oregon 550. BUT, I can't get Easy GPS to recognise it to send my pocket query to the Oregon. I've also tried downlaoding bulk waypoints from geocaching.com, without success. I have downloaded the plug in required, and the test was good. I can download caches individually. Can someone please advise how I can download bulk caches, inc (translated) hints and logs? Many thanks Quote Link to comment
+Rock-hopper Posted December 8, 2009 Author Share Posted December 8, 2009 Ah, finally find the answer, and this works! GC2.) How do I download geocaches into my Garmin Oregon? There are three ways to download geocaches directly from geocaching.com. You need to be a premium member to use 2) and 3) below. Non-premium members can use option 1) but get only limited information downloaded to the Oregon. Connect your Oregon to your computer and do one of the following: 1.Goto the cache page you would like to download to your Oregon and select the "Send to GPS" button. Select the Oregon as the device and click Write. This only allows you to download one cache at a time to your Oregon . You will need to have Communicator installed in order for this to work. 2.Goto the cache page and click the "GPX eXchange file" button and select "download file" in your browser. Once the gpx file is downloaded to your computer copy it to [OR drive]:\Garmin\GPX . This method only allows you to download one cache at a time. 3.Create and run a Pocket Query. Once you receive the pocket query via email, save the attachment, unzip the file and copy both gpx files to [OR drive]:\Garmin\GPX. Geocaches will show up on the Found and/or Unfound List and child waypoints will show up as waypoints on the Oregon. This works for up to 500 geocaches (the limit of the pocket query). After completing one of the three steps above, disconnect, power on the Oregon and the caches will be visible in Main Menu>Geocaches. Quote Link to comment
+blubalu Posted December 8, 2009 Share Posted December 8, 2009 Ah, finally find the answer, and this works! GC2.) How do I download geocaches into my Garmin Oregon? 3.Create and run a Pocket Query. Once you receive the pocket query via email, save the attachment, unzip the file and copy both gpx files to [OR drive]:\Garmin\GPX. Geocaches will show up on the Found and/or Unfound List and child waypoints will show up as waypoints on the Oregon. This works for up to 500 geocaches (the limit of the pocket query). I just asked myself and Google the same question minutes after my shiny new Oregon 550 arrived and here's the answer. Thanks to Rock-hopper. You can load GPX files from multiple PQs into the Garmin/GPX directory and they are all shown on the Oregon (up to the 2000 waypoints limit I guess). Quote Link to comment
+Starruby Posted December 9, 2009 Share Posted December 9, 2009 You can load GPX files from multiple PQs into the Garmin/GPX directory and they are all shown on the Oregon (up to the 2000 waypoints limit I guess). You can load maximum 200 GPX files or 5000 caches in your 550 Quote Link to comment
+geocacheruk Posted September 13, 2010 Share Posted September 13, 2010 Ok My Germin Oregon 550t when dead from 14 hours and all my downloads was deleted?? on the geocaching software What do I need to keep them. Quote Link to comment
Miguelsonia Posted August 13, 2013 Share Posted August 13, 2013 hello. and does not give to spend more than one? is to go one by one is tricky. or just the premium can do this? thank you Quote Link to comment
+4thnoel Posted August 20, 2013 Share Posted August 20, 2013 I just tried to open my query but cannot do it. It says I need to buy a program to do it. How do I avoid this? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.