+Lydford Locators Posted October 13, 2009 Share Posted October 13, 2009 Can someone tell us what we've done wrong. Usually we unzip our PQ and copy the two gpx files into /Garmin/GPX, but Garmin isn't there any more. We've tried changing our lead and using a different USB port but nothing helps. It was working earlier today but now when we plug in our Oregon it fires up like normal but nothing more. Any ideas on how to get it working again? Quote Link to comment
+splashy Posted October 13, 2009 Share Posted October 13, 2009 (edited) Disconnect the usb from the computer, insert the mini usb in de Gps. Push the on button, keep pushing while inserting the usb in the computer. Computer should 'see' it after a while. Edited October 13, 2009 by splashy Quote Link to comment
+g-o-cashers Posted October 13, 2009 Share Posted October 13, 2009 Does the unit look like it has entered USB mass storage mode? You should see a graphic of a computer and GPS on the screen if it is. Quote Link to comment
+JetSkier Posted October 13, 2009 Share Posted October 13, 2009 If you're in "Spanner" mode, you have to answer "Yes" on the GPS to get it to connect in mass storage mode. JetSkier Quote Link to comment
+Lydford Locators Posted October 13, 2009 Author Share Posted October 13, 2009 Thanks everyone for your suggestions - we are now sorted, although we're not quite sure what upset it so much. Solved by the first rule of IT support - turn the computer off and on again. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.