+Brassine Family Posted May 2, 2009 Share Posted May 2, 2009 There are several caches that are multi and take me to an area. then I have to go so far at a bearing of x degrees. How do I do this? my wife got me a cheap compass for this, but I dunno what in the world I am doing. the dial that has the numbers on it, moves... So what do I do??? Ex. of caches are: http://www.geocaching.com/seek/cache_details.aspx?wp=GCAD48 http://www.geocaching.com/seek/cache_details.aspx?wp=GCXYHC ahhh you get the idea. there are about 8 more in my area, don't want to bore you too much!!! Quote Link to comment
+GIDEON-X Posted May 2, 2009 Share Posted May 2, 2009 Hi, it's easy after a few trys, hold your compass level, find north, set the bezel to "0" at north, then set the bearing # on the bezel to the arrow or what ever mark is onthe base plate, then go for it http://www.ussartf.org/compass_basics.htm P.S. Myself I would forget about true north and the declanation thing and use mag. north for what you are doing Quote Link to comment
+Brassine Family Posted May 2, 2009 Author Share Posted May 2, 2009 Hi, it's easy after a few trys, hold your compass level, find north, set the bezel to "0" at north, then set the bearing # on the bezel to the arrow or what ever mark is onthe base plate, then go for it http://www.ussartf.org/compass_basics.htm P.S. Myself I would forget about true north and the declanation thing and use mag. north for what you are doing Thank you very much!!!!! Quote Link to comment
+Prime Suspect Posted May 2, 2009 Share Posted May 2, 2009 A mirror compass is a bit better choice for siting a bearing. You dial in the bearing, and open the mirror to a 45 degree angle. This allows you to hold the compass flat, at eye-level, and still be able to view the dial (in the mirror). Line the needle up with North. There is usually a sighting line on the mirror and on the compass face, and a notch at the top of the mirror. When all the line segments form an unbroken straight line, you can sight through the notch to see your target. Quote Link to comment
+edscott Posted May 6, 2009 Share Posted May 6, 2009 Assuming you are using a base plate style compass... Which is my recommendation... Set the directional arrow on the base plate at the degree bearing that the puzzle requests you use. In your area you can ignore declination. Turn the whole compass to align the red end of the needle with the N on the housing. Go in the direction of the arrow scribed into the front of the base plate. Way more than you need to know is on this page. http://www.learn-orienteering.org/old/ Quote Link to comment
+Pat in Louisiana Posted May 6, 2009 Share Posted May 6, 2009 Or you could project a waypoint with your gpsr or use fizzycalc. http://www.fizzymagic.net/Geocaching/FizzyCalc/ to get the new location. Quote Link to comment
+GIDEON-X Posted May 6, 2009 Share Posted May 6, 2009 Or you could project a waypoint with your gpsr or use fizzycalc. http://www.fizzymagic.net/Geocaching/FizzyCalc/ to get the new location. Really like this one......all for using the GPSr to it's max. "Projection" rules Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.