Grasscatcher Posted February 25, 2008 Share Posted February 25, 2008 I'm trying to connect an APRS rig.....a Kenwood D7A (G) radio and a Garmin 76CSx (or 76CS) I can find a cable (Gilsson) to connect the radio to the GPSr (2 way data transfer thru the 4 pin plug) and also to a 12v power supply. However, the 12v only supplies power to the GPS , NOT also to the radio. I want to also power the radio from the 12v supply. Anyone know of a cable? Quote Link to comment
+Klemmer Posted February 25, 2008 Share Posted February 25, 2008 (edited) If it's the radio plug you are after, you might have better luck in posting in the GPS and Ham Radio forum. Wish I could help, sorry..... Edited February 26, 2008 by Klemmer & TeddyBearMama Quote Link to comment
Grasscatcher Posted February 25, 2008 Author Share Posted February 25, 2008 K & TBM, You are right....my bad. I had been there, and was checking here also , and forgot where I was when I made the post. I just duplicated the post over there. Thanks Quote Link to comment
+JohnnyVegas Posted February 26, 2008 Share Posted February 26, 2008 (edited) K & TBM, You are right....my bad. I had been there, and was checking here also , and forgot where I was when I made the post. I just duplicated the post over there. Thanks The radio should have it's own cable that goes from the radio to a 12 volt plug. Try this link on e-ham D7A and APRS Edited February 26, 2008 by JohnnyVegas Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.