Jump to content
Sign in to follow this  
Followers 1
xxgg

[60CSx] Cold start takes long to capture signal, right ?

Recommended Posts

Hello.

 

So to my knowlodge when you cold start a GPS unit it does take few minutes to get some signal and lock in, right ?

 

This is what happened today. I had my 60CSx mounted in my car and drove to a nearby gas station. After pumping some gas in , I turned on my GPS and guess what happened? I had signal and it locked in within like... 20 seconds. (remember, this was first time turning it on today)

 

So even if it's not turned on but left out in the opening... it helps lock on to signal much faster ? It can't be working like that, right? Since GPS isn't being powered.

 

Don't know what happened but that must be how SiRFInstantFixII must feel???

Share this post


Link to post

Hello.

 

So to my knowlodge when you cold start a GPS unit it does take few minutes to get some signal and lock in, right ?

 

This is what happened today. I had my 60CSx mounted in my car and drove to a nearby gas station. After pumping some gas in , I turned on my GPS and guess what happened? I had signal and it locked in within like... 20 seconds. (remember, this was first time turning it on today)

 

So even if it's not turned on but left out in the opening... it helps lock on to signal much faster ? It can't be working like that, right? Since GPS isn't being powered.

 

Don't know what happened but that must be how SiRFInstantFixII must feel???

 

Mine has done that since I got it. The only time it takes a bit is when I go from say TN to CO and then turn it on. When its relatively close to the last place it had a fix it takes a much shorter time to get a fix.

Share this post


Link to post

Hello.

 

So to my knowlodge when you cold start a GPS unit it does take few minutes to get some signal and lock in, right ?

 

This is what happened today. I had my 60CSx mounted in my car and drove to a nearby gas station. After pumping some gas in , I turned on my GPS and guess what happened? I had signal and it locked in within like... 20 seconds. (remember, this was first time turning it on today)

 

So even if it's not turned on but left out in the opening... it helps lock on to signal much faster ? It can't be working like that, right? Since GPS isn't being powered.

 

Don't know what happened but that must be how SiRFInstantFixII must feel???

The acquisition time from a cold start can be variable, depending on how long it has been off and how far you have moved from the previous location, but it rarely takes mine several minutes if I have good reception. The one exception to this is if you are moving when it is trying to acquire; it doesn't like that.

Share this post


Link to post

The acquisition time from a cold start can be variable, depending on how long it has been off and how far you have moved from the previous location, but it rarely takes mine several minutes if I have good reception. The one exception to this is if you are moving when it is trying to acquire; it doesn't like that.

This matches my experience. My 60CSx usually gets a lock on the satellites in less than a minute if I'm standing still or just walking slowly. However, if I turn the unit on while I'm driving down the road, it can take several minutes to acquire the sats. When that happens, I almost look forward to getting stopped by that next traffic light so the unit will have a chance to finally get a lock. :D

 

--Larry

Share this post


Link to post

I was wondering the samething? If mine has been off for a day or so it seems to take longer to initialize? Because it is so random I was actually wondering if something was wrong with the unit? Based on what you guys have described that is the same response I get.. If driving it may take a few mintues. If it's been a day or so it may take longer than if it was on earlier in the hike...

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  
Followers 1

×
×
  • Create New...