Jump to content

Garmin GPSmap 60CSx


Recommended Posts

Hallo,

 

bei meinem neuen Navi "GPSmap 60CSx" geht offenbar die WAAS/EGNOS-Funktion nicht. Habe es mit dem Vorgänger direkt verglichen. Beim alten Gerät geht es ohne Probleme, aber beim neuen eben nicht. Hat da jemand genauere Informationen?

 

Zur Info: Meine Firmware: 3.3 und Sirf-Version: 2.9

Edited by GeoPhysiker
Link to comment
Hallo,

 

With my new "GPSmap 60CSx" the WAAS/EGNOS-function does not work. I compared it with an earlier unit. It works without problems in the older unit, but not with the new one. Does anyone have any additional information?

 

My Firmware: 3.3 and Sirf-Version: 2.9

I have not had any problems, but I generally don't bother with WAAS on mine as it does not help much on this unit. Still I can turn this feature on and off without any trouble. What is your unit doing that suggests to you that WAAS is not working when you enable it?

Link to comment

Hallo,

 

bei meinem neuen Navi "GPSmap 60CSx" geht offenbar die WAAS/EGNOS-Funktion nicht. Habe es mit dem Vorgänger direkt verglichen. Beim alten Gerät geht es ohne Probleme, aber beim neuen eben nicht. Hat da jemand genauere Informationen?

 

Zur Info: Meine Firmware: 3.3 und Sirf-Version: 2.9

 

WAAS/EGNOS geht normalweise nicht wann "battery saver" eingeschaltet ist.

Link to comment

Hallo,

 

bei meinem neuen Navi "GPSmap 60CSx" geht offenbar die WAAS/EGNOS-Funktion nicht. Habe es mit dem Vorgänger direkt verglichen. Beim alten Gerät geht es ohne Probleme, aber beim neuen eben nicht. Hat da jemand genauere Informationen?

 

Zur Info: Meine Firmware: 3.3 und Sirf-Version: 2.9

 

WAAS/EGNOS geht normalweise nicht wann "battery saver" eingeschaltet ist.

I initially thought this was the problem also, but on my 60CSx I can have "Battery Saver" selected and WAAS does enable.

Link to comment

Hallo und vielen Dank für die schnelle Antworten,

 

aber die Batteriesparfunktion ist natürlich deaktiviert.

 

Also wenn ich das Gerät einschalte, kein Sparmodus, dann zeigt er zwar kurz die Satelliten 33 und dann 39 an, auch mit guter Signalstärke, aber dann verschwinden diese wieder. Bei meinem 60CS hat er den Satelliten Nr. 33 sofort und korrigiert. Sehe ich an den 'D's bei den Signalbalken.

 

Etwa ein Garantiefall oder doch nur ein Anwendungsfehler?

 

Die Software habe ich bereits neu aufgespielt. Die Batterien sind voll.

Gibt es vielleicht einen Mikroprozessor-Reset?

Edited by GeoPhysiker
Link to comment

Since this is still mainly a forum in English, I'll respond in English.

 

Newer units probably aniticipate that the SBAS service should be in operational mode, or they'll not use it. Since Egnos for many years was running in test mode, this demand was often lifted in older receivers, or they wouldn't bother to try using Egnos at all.

Now your newer model sees the Egnos satellites, but probably finds the "Don't use for navigation" status bit being set, and thus discards them quickly again. After a while, it will make a new attempt, get the same result, discard the satellite again and so on.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...