+ryan3295 Posted April 14, 2007 Share Posted April 14, 2007 Anyone using the ram-mount on their 60 series find it difficult to remove the gps? I find it takes a lot of work to remove the gps and was worried that I would break off the 'knob' on the back of the gps that the mount snaps onto. Any tips, suggestions for making this easier? Quote Link to comment
+Prime Suspect Posted April 14, 2007 Share Posted April 14, 2007 (edited) Anyone using the ram-mount on their 60 series find it difficult to remove the gps? I find it takes a lot of work to remove the gps and was worried that I would break off the 'knob' on the back of the gps that the mount snaps onto. Any tips, suggestions for making this easier? You can file down the tab on the mount that fits in the groove of the knob. You can make it as tight or loose as you like depending on how much you file off. Also, it may not be obvious, but the way to remove the unit is to put your thumb on the tab at the very top, and the side of your forefinger on the back of the "arm" and flex the arm backwards. While doing that, pull the top of the unit forward. Edited April 14, 2007 by Prime Suspect Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.