Jump to content

The All New All New Groundspeak UK Pub Quiz


Followers 29

Recommended Posts

I've seen this on the telly, and I think the fag packet is still in existence, I can't remember what it was though. I'll have a guess at Frank Whittle and the jet engine.

 

Edit: Just realised I hadn't read the right question, so I answered something completely different (clearly a jet engine isn't a 4x4 vehicle!!!!) - Doh.

Edited by MartyBartfast
Link to comment

Any further guesses before I award the half right answer? :)

Not so much a guess ... because I'm not sure what you're getting at with "how the blueprint was created". I assume that the blueprints themselves were created in the conventional manner of the day by draughtsmen at the Rover drawing office in Solihull, where they'd moved after their pre-war factory was destroyed.

 

Rover had a bit of a problem when the war ended. Their model range was a little on the ostentatious side and too expensive to be successful in the austerity of post-war Britain. So they needed a stop-gap that could quickly be put together to tide them over until they could design more down-to-earth models. Stealing a march from Willys, they created a rugged vehicle for use by farmers. The prototype even had a tractor-like PTO! They couldn't afford the time to design it from the ground up, and so they pressed components from their pre-war range into service in the new vehicle. Steel was heavily rationed, and so they used aluminium alloy left over from their war-time aircraft making for the body panels. Although it was a hotch-potch cobbled together from necessity, the Landrover was an immediate success.

 

It was only meant as a stop-gap. Yet descendents of the Landrover are all that's now left of the once-proud Rover company :(

Link to comment

Right- first apologies for the delays, had a bit of trouble in the real world that needed sorting.

 

Back to the quiz. The answer I was looking for was Land Rover -the model being what is now the Defender. The second part I was looking for was

 

"Maurice Wilks tested a prototype for what has become one of the world's most successful off-road utility vehicles in fields at Red Wharf Bay just across the road from Ysgol Dwyran.

As an inventive engineer Mr Wilks thought he could come up with a better vehicle for farmers, combining the qualities of a car with those of a tractor. He drew a sketch of his ideal all-terrain vehicle in the sands of Red Wharf Bay and the Land Rover was conceived."

 

I now need clarification on who I award the Ding to- Simply Paul for being first to name Land Rover ...or Pajaholic for a more detailed explanation of the process, but without actually mentioning Red Wharf Bay or drawing in the sand (but almost everything else about the creation!)

<_<

Link to comment

Thanks, both to CnJnA and to Simply Paul.

 

To be honest, the answer came as a bit of a surprise as, to an engineer, a blueprint is something very different to an initial sketch! Strictly, a blueprint is a copy of a technical drawing or other document made by overlaying the original drawing, which is drawn on transparency or tracing paper, onto a medium (paper, vellum, linen, etc.) that is coated with a light-sensitive compound that turns blue when exposed to light. Light (sometimes visible, sometimes UV) is shone through the original, and then the copy is washed to remove all the compound that hasn't turned blue. The result is a negative image of the original drawing (i.e. white lines on a blue background). Sometimes, the term "blueprint" is used to refer to the formal specification of an engineering product or construction project, which comes from the copies that left the drawing office originally being made by the blueprint process.

 

That said, for the ding, what (as applied to automotive engineering) is meant by the term "blueprinting"?

Link to comment

That said, for the ding, what (as applied to automotive engineering) is meant by the term "blueprinting"?

 

I believe it's when an assembly, (usually the engine), is stripped to it's component parts and re-assembled making certain that all components are machined to exactly the correct size and that all clearances are exactly to specification. i.e.... that everythig is exactly as per the 'blueprint'.

Link to comment

Close enough for the DING!

 

Every dimension is given a nominal size together with a tolerance. For example, if the nominal size is 12.50 mm and the tolerance is 0.05 mm, then the finished size is deemed acceptable if it's in the range of 12.45 mm to 12.55 mm. Blueprinting is usually achieved by selecting components that are the closest available to the nominal size, and so implicitly dimensionally as close to optimal as possible.

 

Over to Parisee...

Link to comment

That's pretty much correct and I'll give the 'DING' to Clue-72.

Ira Hayes was was a native American, belonging to the Pima tribe of Arizona. He was in the U.S. Marine Corps and was one of the six men to raise the American flag on Iwo Jima. After the war he became an alcoholic and died of cold and alcohol poisoning after an all night binge in 1955. He was buried, with full military honours, in Arlington National Cemetery.

Some would say that his true claim to fame was the fact that Johnny Cash sung a song about him! :D

Link to comment
"Biggles: Adventures In Time" I think.
A rip-snorting chocks-away of a Ding for a film containing such tally-ho and pip-pip dialogue as:

 

[Debbie and Chuck enter Jim's hotel room to find Jim dressed as a nun, and with a gun on the chair]

Chuck: Religious Transvestite Bank robber. That one's not even in the book.

 

And:

 

Biggles: Quick! Untie us before they realise you're not a God, you're just an American.

 

To say nothing of:

 

[Having travelled to 1986, Biggles has climbed behind the controls of a police helicopter]

Jim Ferguson: You can't fly this. You don't know how.

Biggles: If you can fly a Sopwith Camel, you can fly anything.

 

Over to you!

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Followers 29
×
×
  • Create New...