Geostorm1 Posted January 15, 2007 Share Posted January 15, 2007 HOw do you input coordinates into a Magellan explorist 300 ? Or can you even do it ? Quote Link to comment
+briansnat Posted January 15, 2007 Share Posted January 15, 2007 Take a look at your owner's manual and find the page where it tells you how to mark a waypoint. Do that. Then go to the page where it tells you how to edit a waypoint and edit the waypoint information to match the desired coordinates. Quote Link to comment
+cmiyc Posted January 16, 2007 Share Posted January 16, 2007 I don't have an eXplorist 300, but what I gathered from the manual everything must be entered manually. It appears Magellan doesn't include PC connectivity with all of their models. Quote Link to comment
Spyeye Posted January 20, 2007 Share Posted January 20, 2007 I went to the web site and found the insturctions was a lot better for me to figure out how to put my Lat and Longs. Hope that helps if no pm me for further instuctions. Quote Link to comment
+Prairie Dog Posted January 22, 2007 Share Posted January 22, 2007 Here is a link to the Magellan Explorist 300 owners manual. This the For the North American model and the manual is written in English. You will need Adobe reader to view this PDF file Navigate to page 33 of the PDF and read about marking a point of interest not at your present location. Hope this helps. This model will also connect to your PC via a USB port and special cable. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.