+Rosterman Posted July 16, 2006 Share Posted July 16, 2006 I got an RMA number and the unit is going back to Garmin tomorrow. The screen would fade out on my RAM mount on the motorcycle using batteries. I could squeeze the sides of the 60Cx with my fingers and repeat the problem. I hope the replacement is trouble free. Quote Link to comment
+Rosterman Posted July 27, 2006 Author Share Posted July 27, 2006 Got my replacement today. Emailed my tech support contact about the MapSource registration, and he sent me the codes immediately. I'm very pleased with Garmin's support! Quote Link to comment
Rhialto Posted July 28, 2006 Share Posted July 28, 2006 So the new unit don't do the problem you reported? I don't own one but I thought it could be common... Have you noticed what firmware they sent it with? Just curious. Quote Link to comment
+Rosterman Posted July 28, 2006 Author Share Posted July 28, 2006 So the new unit don't do the problem you reported? I don't own one but I thought it could be common... Have you noticed what firmware they sent it with? Just curious. So far it is fine. It came with 2.60, and 2.40, and I've already updated it to the most current 3.00 and 2.70 combo. I haven't used it in the RAM mount on the motorcyce yet (bike is awaiting new tire). I'm fearfult the RAM cradle or the vibes on the bike caused the problem. The RAM mount caused wear on the side of the 60Cx, and I may file the mount a bit to see if I can relieve the pressure point. Quote Link to comment
Rhialto Posted July 28, 2006 Share Posted July 28, 2006 So the new unit don't do the problem you reported? I don't own one but I thought it could be common... Have you noticed what firmware they sent it with? Just curious. So far it is fine. It came with 2.60, and 2.40, and I've already updated it to the most current 3.00 and 2.70 combo. Weird they don't ship with latest firmware since it comes right from their hands. Or was it a sealed box 4 months old? We don't know... My Suzuki Volusia got a new set of tires yesterday... :-) What do you think of the zumo? Quote Link to comment
+Rosterman Posted July 28, 2006 Author Share Posted July 28, 2006 The replacement was stuck in a cardboard box just like the one I sent them. I had removed the belt clip knob, lanyard, memory card, and screen protector from the original before I shipped it. The replacement came back the same way, but with the factory screen protector on it. A friend had a Volusia for a while and loved it. My Suzuki DRZ400SM is waiting for the tire, and is a hoot to ride, and modify. My '93 Honda ST1100 hasn't moved since I got the supermoto. The new Garmin Zumo is fancy but doesn't meet my needs. I love the 60Cx, and use it for geocaching, and like the form factor. Ride safe! Quote Link to comment
+thefiveofus Posted July 28, 2006 Share Posted July 28, 2006 <snip> I'm fearfult the RAM cradle or the vibes on the bike caused the problem. The RAM mount caused wear on the side of the 60Cx, and I may file the mount a bit to see if I can relieve the pressure point. see http://www.gpscity.com/item-ram-mount-garm.../ramholga11.htm it's a connector that connects the garmin mount to the ram stuff... you'd need to buy the full garmin mount, then only use the garmin connector, but maybe this would help prevent the problem? good luck.... Quote Link to comment
+Rosterman Posted July 28, 2006 Author Share Posted July 28, 2006 (edited) see http://www.gpscity.com/item-ram-mount-garm.../ramholga11.htm it's a connector that connects the garmin mount to the ram stuff... you'd need to buy the full garmin mount, then only use the garmin connector, but maybe this would help prevent the problem? good luck.... I've seen that mentioned in another thread. I have the Garmin auto bean bag mount, which I like being able to put the whole mess on the floorboard when parking at a store. gpscity has the Garmin 60 mount: http://www.gpscity.com/item-garmin-gpsmap-...t/60automnt.htm Has anyone used this combo on a motorcycle or bicycle?? I don't know how secure the Garmin mount would be in that environment. Edited July 28, 2006 by Rosterman Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.