Hanapaa Posted April 1, 2006 Share Posted April 1, 2006 im new, how do i transfer the geocaches to my legend c with this cord? pls be specific i dont know computers that well. Quote Link to comment
Dale_Lynn Posted April 1, 2006 Share Posted April 1, 2006 Basically you need to use "cord" to connect computer to GPS.... Depending on what type cord, serial cable or USB, you will need a program like EasyGPS which will accept the file with cache coordinates (waypoints) downloaded from geocache.com and transfer the coordinates to GPS. IF cord is USB, you need to load any driver for USB connection ( from CD disk that came with GPS) into computer before you connect GPS+Cable to computer. IF cable is USB, You need to setup EasyGPS with information about GPS type ( model number usually) and it will find GPS unit through USB cable. IF cable is serial (RS232) you need to know the port NUMBER cable is connected to and be sure Easy GPS has proper port number is it setup so it has direct connection to GPS through serial cable.... Dale Quote Link to comment
+briansnat Posted April 1, 2006 Share Posted April 1, 2006 (edited) The Legend C will have a USB cable which should plug into any of of the USB ports on your PC. If your PC is a newer model it should have one or two USB ports on the front and several in the back (little square thingies). Plug the cable into here and turn your GPS on. Then you need to dowload EasyGPS. Once EasyGPS is running, Click on 'file' then 'preferences' to select the type of GPS you have (You may have to use Garmin 60C if Legend C is not available). Next, on the search page (for example if you you searched for caches nearest your zipcode), you will see a box on the far right that corresponds with each cache on the page. Check off the boxes of the caches you want to download, then page down towards the bottom and click on the 'download waypoints' button. A box will pop up. Select 'save to disk' (you're going to have to remember where you saved it to). Next, in EasyGPS, open the file you just saved. You should see all the waypoints listed in the display box. Now click on 'GPS' (its near the top of the page), then click on 'send to GPS'. It should take a second or two and your GPS is loaded with the waypoints. Hope this helps. If not, let me know what I can clarify. Edited April 1, 2006 by briansnat Quote Link to comment
+briansnat Posted April 1, 2006 Share Posted April 1, 2006 (edited) Oh, before you do anything, you have to load the USB driver for your Garmin. Your GPS should have come with a disk that will do this. If not you can get it from the Garmin website. Edited April 1, 2006 by briansnat Quote Link to comment
Hanapaa Posted April 1, 2006 Author Share Posted April 1, 2006 i figured out how to put the caches i want into a folder in easy gps but when i try to send it to my gps it does a very quick flash across the screen and i dont see them in my gps, its doesnt say "sending" or anything, something flashes on screen and thats it. help? anyone Quote Link to comment
+briansnat Posted April 1, 2006 Share Posted April 1, 2006 If you're only doing a few caches it may happen so quickly that all you will see is a flash across the screen. If you are doing a few hundred you will see the message long enough to read it. Quote Link to comment
Hanapaa Posted April 1, 2006 Author Share Posted April 1, 2006 im only tring to transfer 8 caches so it is just flashing but i dont see them in my geocache or waypoint folder in my legend. where are they? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.