+JimmyEv Posted March 23, 2006 Share Posted March 23, 2006 I have UTM Coordinates like this: UTM R East 0390472 North 3318448. How do I enter these into a Magellan? My Sportrak and explorist want them in this format: UTM ## East ####### North #######. Quote Link to comment
Alphawolf Posted March 23, 2006 Share Posted March 23, 2006 Your first 2 digits will be the zone. There must be a zone. There are an identical set of coordinates for each and every zone, so that is why you must tell it which zone you need. Then you follow with the easting and northing numbers. Quote Link to comment
+sd70feb Posted August 23, 2006 Share Posted August 23, 2006 i learned abit from just this post..but, am i right to say that while in UTM, i can or have to skip the zero in the E/W cords? my Magellan X 210 only has the two digit zone# at the beginning and six digits while the N/S cords have seven digits. and, will that zero ever change to another # ? im thinking not. Backpacker Mag uses UTM in there hikes in the back of the mag, and im used to Long/Lat for caching. But i want to use the info to do some hikes. just let me know if im going to get lost or if im heading in the right direction with my figuring of the UTM. THANKS team S Quote Link to comment
dave and jaime Posted August 23, 2006 Share Posted August 23, 2006 i learned abit from just this post..but, am i right to say that while in UTM, i can or have to skip the zero in the E/W cords? my Magellan X 210 only has the two digit zone# at the beginning and six digits while the N/S cords have seven digits. and, will that zero ever change to another # ? im thinking not. Backpacker Mag uses UTM in there hikes in the back of the mag, and im used to Long/Lat for caching. But i want to use the info to do some hikes. just let me know if im going to get lost or if im heading in the right direction with my figuring of the UTM. THANKS team S yes. infact some surveying equipment also only have a 6 digit northing and the seventh digit has to be added by the postprocessing software,(user has to have knowledge of thezone setup though). Quote Link to comment
+Red90 Posted August 24, 2006 Share Posted August 24, 2006 (edited) UTM Zones There should be three digits, like 11U Edited August 24, 2006 by Red90 Quote Link to comment
+GPSlug Posted August 24, 2006 Share Posted August 24, 2006 There should be three digits, like 11U And if it only gives you 2 digits, the letter is redundant. It isn't necessary because it can be derived from the northing. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.