+TeamVilla5 Posted November 11, 2005 Share Posted November 11, 2005 As a Geophite (is that the word I'm looking for?), and having only really played with a GPS in conjunction with a topo map, I'm wondering if anyone here uses a topo & UTM to find the general area of a cache in order to get there, then use their GPSr once in the area? Also, do you keep your units in HHMMSS or in UTM mode to find caches? TIA to all! Lori V. Team Villa5 Quote Link to comment
+briansnat Posted November 11, 2005 Share Posted November 11, 2005 I used the maps to find the general area of most caches before I got an autorouting GPS. I still do it with some if parking may be an issue. The autorouting usually takes you to the road nearest the cache, which not necessarily the best way to approach it. Quote Link to comment
+sept1c_tank Posted November 11, 2005 Share Posted November 11, 2005 (edited) I'm stumped with geophite. A geophyte is a perennial plant, such as a crocus or tulip, propagated by buds on underground bulbs, tubers, or corms. I rarely go out without having (and using) maps. For me, GPS=HHMMSS. Edited November 11, 2005 by sept1c_tank Quote Link to comment
+RobRee Posted November 11, 2005 Share Posted November 11, 2005 i use expertGPS, GoogleEarth and aerial maps to locate the best approach. we carry topos of the area, and print out aerial maps if they show major trail veins on them. if i cache on my own.. i just go for it.. but with the kids we do some homework first. on expertGPS i usually place a few waypoints in key locations, including backstop points for the kids to get an idea for where they are. i like to teach terrain association to the kids, but it is a little difficult on Long Island in NY... no real standout features. Quote Link to comment
+Snoogans Posted November 11, 2005 Share Posted November 11, 2005 Almost always. Quote Link to comment
+TeamVilla5 Posted November 11, 2005 Author Share Posted November 11, 2005 sept1c_tank... geophyte... as in neophyte geocacher! LOL! Webster needs to update their definitions! ;-) Happy Cachin'! Lori V. Team Villa5 Quote Link to comment
+Genius Loci Posted November 11, 2005 Share Posted November 11, 2005 I always check the large scale 1:24,000 or 1:25,000 topo map before I hunt a cache - even the urban ones. I keep all the large scale topo maps (within 100 miles of home) on my Pocket PC for walkin', and on the portable when drivin'. My buddies used to laugh... but I've saved their butts with the maps so many times now, they always ask ME to check the map before we hit a cache in new territory. I use the maps to KNOW which side of a river or stream the cache is hidden on, how to avoid the worst slopes, if it's in dense tree cover, on a bridge, etc. etc. Often, I can tell my hunting partners just about where the cache is gonna be hid even before the cache hiding place is in view. Sometimes, I only use the GPSr for the last couple hundred feet or to "close in" on the final hiding spot. Sometimes, I don't even need the GPSr at all. Quote Link to comment
+Mule Ears Posted November 11, 2005 Share Posted November 11, 2005 I use topo software to plan out a preliminary route to follow using GPS. These routes sometimes don't survive contact with the real outdoors, so I carry a paper copy of the applicable map to aid in on-the-spot revisions. Quote Link to comment
+Arrow One Posted November 11, 2005 Share Posted November 11, 2005 I use maps to get to the area (not topo). Then use my GPS and sometimes a compass (when satellite recep is bad). When all else fails, I use my "caching skills", as my nephew and team member would call them. I've checked topo maps before I go, which help identifying the terrain and any lakes or rivers, but I've never used one in the field. Quote Link to comment
ATMouse Posted November 11, 2005 Share Posted November 11, 2005 Topo maps are good! I use them, always have....uh...but not for urban caches. If I could paper my office walls with topos, I would. Quote Link to comment
getson Posted November 12, 2005 Share Posted November 12, 2005 I always use UTM. It's how i learned to use a GPS, it's what we use at work in the field, and it's just so much easier with everything based in meters. I haven't a clue how far a minute or second or whatever is... but i can look down at the UTM co-ords and know exactly how many meters i'm off etc. Sometimes it causes problems with geocaching since we use UTM and NAD83 at work and sometimes i forget to switch datums. But no major problems so far. Quote Link to comment
+QDman Posted November 13, 2005 Share Posted November 13, 2005 sept1c_tank... geophyte... as in neophyte geocacher! LOL! Webster needs to update their definitions! ;-) Happy Cachin'! Lori V. Team Villa5 I'm fond of the word "neocacher." Quote Link to comment
+Team Neos Posted November 13, 2005 Share Posted November 13, 2005 I'll use ANY excuse to look at a map, just because I love maps so! As others have said, I use topo maps to check out trails, elevation, and general terrain information before heading out to caches that involve a bit of hiking...and I use street maps to look for driving and parking information for all caches in unfamiliar areas. I have found that it is good to have at least seen the maps so that if there is unexpected road closures I have some idea of how to get to the cache another way. I like to think that if I ever got lost while looking for a cache, that I would at least have some idea of the boundaries of the area. It would certainly make me feel foolish have my GPS fail and then spend two nights camping in the woods waiting for rescuers if I was just on the other side of the hill from a main road the led to a small town! Quote Link to comment
Tahosa and Sons Posted November 13, 2005 Share Posted November 13, 2005 TOPO and UTM's are used both to hide and find the caches in the back country I travel in. Rarely depend on the GPS in the areas I go into. Quote Link to comment
+whatevah.com Posted November 17, 2005 Share Posted November 17, 2005 I use Google Earth almost exclusively (the area we cache in has high resolution). I can see where the cache is, roads & parking, streams, etc. Of course, in some areas the data is a couple years old, but that's part of the fun, right? The GPSr is loaded with hunting trails and access roads plus streams and topo data, in addition to the normal roads, so if we get confused when doing a bunch of caches, we just use the mapping function of the Lowrance H2O. When doing some offroading caches in New Jersey, I asked "THIS trail is in the GPS" a few times, as the trail was accessible only by 4x4 vehicles (which we were in). I only use topo maps when I'm in an area that Google Earth doesn't have high resolution coverage of. Of course, for caches less than 0.5 miles from parking, I don't even bother if the terrain rating isn't too high. Quote Link to comment
+Web-ling Posted November 19, 2005 Share Posted November 19, 2005 I almost always use either a topo map and/or aerial photo to get near the cache. And, about 70% of the time, I find the cache without ever turning the GPS on, just using the topo or aerial loaded into my PDA. Quote Link to comment
+Nuwati Posted November 19, 2005 Share Posted November 19, 2005 I used a topo as one of my stops for a multi cache I placed. I marked the waypoint and the finder had to use the grid to find the UTM and then enter it into their GPS. Quote Link to comment
+jackratt Posted November 29, 2005 Share Posted November 29, 2005 I have a computer mapping program called Street Atlas and I load waypoints from GSAK into it. These are the same waypoints that go into my GPS and my Palm V. I can look at potential caches and even print out a map so I can plan ahead how to get close without a GPS. I've never tried UTM, it's always HHMMSS. Don't know about Geophites or Geophytes but I hope I can handle myself if I ever get into a Geofight. Quote Link to comment
+edscott Posted November 29, 2005 Share Posted November 29, 2005 As a Geophite (is that the word I'm looking for?), and having only really played with a GPS in conjunction with a topo map, I'm wondering if anyone here uses a topo & UTM to find the general area of a cache in order to get there, then use their GPSr once in the area? Also, do you keep your units in HHMMSS or in UTM mode to find caches? TIA to all! Lori V. Team Villa5 Lots of people use maps in one way of another to find the area. If you are really into maps try finding a few without using the GPS at all. Quote Link to comment
Silentshadow Posted December 2, 2005 Share Posted December 2, 2005 I always print a map of the area from my Terrain Navigator Pro program. It is grided for UTM's, NAD 83. But my GPS is always set for Lat/Long. The first cache I found was done solely with a map and compass. *Polly Takes the Plunge-AWESOME CACHE QUESTMASTER!* I like to do the caches with only the map and compass but I always take along the GPS just in case.......LOL. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.