+Andy and Robin Posted August 22, 2005 Share Posted August 22, 2005 When I delate all waypoints on my 60cs and then try to load 1000 from GSAK it comes up with a waypoint memory full window on the GPS and then if I connect it to Mapsource and transfer the waypoints I only get 999 waypoints. What is going on here? I have done a hard reset on the unit recently and it still happens. Quote Link to comment
+Andy and Robin Posted August 22, 2005 Author Share Posted August 22, 2005 And by the way, if I try to mark a waypoint it wont let me do that either. Comes up with the "Waypoint memory full" message again Quote Link to comment
+webscouter. Posted August 22, 2005 Share Posted August 22, 2005 try recieving all waypoints from the unit into mapsource then you will be able to find the one that isn't part of your upload. Quote Link to comment
+Andy and Robin Posted August 22, 2005 Author Share Posted August 22, 2005 I have done that, I deleted ALL waypoints from the GPS, then I try to upload 1000, get the memory full message, send all waypoints to Mapsource or any other program and there is 999. Can not mark one more on GPS, get memory full message. There is no extra waypoint that is not in my upload. There is only 999 geocaches.Not sure which one is missing but I'm assuming it's the last one that was supposed to transfer. Quote Link to comment
+Andy and Robin Posted August 26, 2005 Author Share Posted August 26, 2005 any other ideas out there? Quote Link to comment
+Lil Devil Posted August 26, 2005 Share Posted August 26, 2005 Write the 1000 to a gpx file, open it with MapSource and upload from there. This will at least help narrow down where the problem lies. Personally I try to never upload more than 950 or so, so that I can leave room to mark other things, or add coords for multis and such. Quote Link to comment
+Andy and Robin Posted August 31, 2005 Author Share Posted August 31, 2005 bump Quote Link to comment
+Sputnik 57 Posted August 31, 2005 Share Posted August 31, 2005 When you delete all waypoints, and then list waypoints (all symbols, find by name) does anything show up? I'm wondering if you have a waypoint that is far away, or has a weird symbol, that isn't being picked up on the delete. If you waypoint list is totally empty, I suspect a problem with the data you are trying to import. Sorry this isn't much help. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.