+TucsonBill Posted July 1, 2005 Share Posted July 1, 2005 I have been trying to install the National Geographic State series topo map for Arizona. It seems to install ok. When I run the program, and zoom in on an area it is supposed to ask for another disk for the last level of maps. It does not do this. I went to the NG website and updated the software to the latest level (3.4.3). Same result. Anyone else have this problem with the State Series? Quote Link to comment
+JohnnyVegas Posted July 1, 2005 Share Posted July 1, 2005 You my call their tech support, the number should be on the box the software came in. Quote Link to comment
Tahosa and Sons Posted July 1, 2005 Share Posted July 1, 2005 I have NG TOPO and when it asks for a certain disc, all I do is put in that disc for the section of the state I'm working on. The only problem I have with is with TOPO 4.0 Streets etc. It does not print in 1:12k. But it does when I use TOPO 3.0. Quote Link to comment
+Sputnik 57 Posted July 1, 2005 Share Posted July 1, 2005 I installed the state disks for Texas on my hard drive, so it doesn't ask for disks, but zooms all the way in without problem. Instructions for hard drive install are on the Topo! web site. If you have the disk space, you may want to give it a try. Quote Link to comment
WH Posted July 1, 2005 Share Posted July 1, 2005 Copy the desired state disk into the top level TOPO directory. Once done, you should be able to zoom all levels of the map without the need for the disk. Quote Link to comment
+Markwell Posted July 1, 2005 Share Posted July 1, 2005 Moving this to the GPS Units and Software forum... Quote Link to comment
Team Sidewinder Posted July 1, 2005 Share Posted July 1, 2005 I have NG TOPO and when it asks for a certain disc, all I do is put in that disc for the section of the state I'm working on. The only problem I have with is with TOPO 4.0 Streets etc. It does not print in 1:12k. But it does when I use TOPO 3.0. Hard to figure they would improve some features with the 4.0 3d and drop some features that I really thought were a good thing. I think NG tech support is the pits. It doesn't seem to matter if you use the phone or email they have never helped me on any problem I have had. I upgraded to the 4.0 with the expansion pack CD and have had nothing but problems. The new 4.0 program seems to look for files that are still left over from the old 3. something program. I will need to remove the CD from the computer drive when zooming in or out from some levels. It will run the CD and never seem to find the files until I remove it, wait a while and then insert the CD after it straightens out. I am not all that computer savy but this didn't ever happen with my original NG state series until I upgraded to the 4.0 Quote Link to comment
+TucsonBill Posted July 1, 2005 Author Share Posted July 1, 2005 I finally got ahold of N.G. Tech Support and they sent me some catalog files to replace the ones in my Arizona State Series. Works fine now. I am running the 3.4.3 softwarre. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.