Kalkendotters

no

That is how is designed: The settings in de messagecenter gives you an email for every message you send. In your geocaching-settings ( https://www.geocaching.com/account/settings/emailpreferences ) there is a setting to send you an email when someone else sends you a message

You have to 'goto' the cache, so it is selected as your destination.When slected you will get a screen in 'geocaching'with the options for description, logs, new coordinates and the hint.

You can upload the picture to your cache. Then create/remember the link to your picture and then delete the picture from your cachepage. The picture will still be there, and you can use the link to show the picture. It will not show up in the gallery. Since there are a LOT of caches where the pictures have been removed from the gallery, they can not delete these pictures without messing up a lot of caches.

You did not discover the correct TB, that is: https://www.geocaching.com/track/details.aspx?tb=TB5EFXK Since it is still locked you have to wait until the real photo of the calibration card is done on Mars.

I dont see any refrence to an encryption system, but it might be me ...

Solved the puzzle in about 5 minutes with the help of a nice website. Without any further information in the cachedescription I would rate it a 3 or higher. And I don't like this kind of mysteries where you have to guess the encryption and all the parameters for it. I think there should be hints for the used encryption and parameters in the description.

It looks like 68 is missing. The 4 new atributes were introduced in september: https://www.geocaching.com/blog/2020/09/four-new-geocaching-attributes/

Only emailadresses that are validated are shown in the list. You can try to revalidate your emailadress. If that does not work, you have to contact Groundspeak so they can investigate why your emailadress is not marked as validated

69 Bonus cache 70 Power trail 71 Challenge cache 72 Geocaching.com solution checker

Then change it to 1.0, save and change it to 1.0.1 and save

Check which Com-port the usb-cable is providing. It can be anyone from com1 to com9 (or even higher). You then have to tell ExpertGPS or GSAK the correct port.

Nothing new (literally). It has already been used a few times in caches in the Netherlands.

And sadly there was no Halloween Horror Event due to the smart-lockdown of the Netherlands. With a lmit of 4 (!) people on a gathering it would not really be possible to organise it.

De eenvoudige oplossing is dan om van je telefoon een wifi-hotspot te maken, en die te gebruiken ipv de bluetooth verbinding. Dat werkt op mijn oregon700 prima.

no

Het GPX bestand NIET openen in Mapsource, maar direct kopieren/verplaatsen naar de /Garmin/GPX map op je GPS Als je ze dan nog niet ziet, dan heb je per ongeluk een filter ingesteld, of de geocaches liggen te ver van je huidige positie (ca 60km)

Het fysieke punt van een Mysterie mag maximaal 3.2 km (2 mijl) van het virtuele coordinaat liggen. Het fysieke punt (d cache) moet minimaal 161m van alle andere fysieke punten liggen (dus caches en fysieke aanwijzingen van bv een multi)

Sometimes the verification of the emailaddress is invalid and does not show it. Just add a new emailaddress and let it be verified. After the emailaddress is verified it will shown in the PQ and notification settings

Een geocaching event in de open lucht lijkt het meest op 'studenten die na afloop van een college naar het park gaan' en mogen dus uit maximaal 4 personen bestaan Ja, de RIVM/overheid is best wel duidelijk met hun richtlijnen ....

You can also search 'near' another location on the GPS. First make a normal waypoint in the area where the caches are, then go to 'geocaching'and search 'near', and select the waypoint you just made. It then should show al the geocaches near the waypoint you selected. Or: Navigate first to the city/street near the geocaches. Then go to the geocaching menu, Search near, and select 'previous destinations'and select the city you have navigated to.

On https://labs.geocaching.com/logs you can see which logs you have for the adventurelabs. If there is an AL with 100 logs, you will have to contact Groundspeak to correct this. According to you profile on https://www.geocaching.com/profile/?u=daval515 (tab geocaches) there should be about 164

Well, that link will never work, because it also needs a log-id. Without it, the system does not know where to put the picture. As I said earlier: you can not upload an image direct to your gallery. It can only be done via a cache/tb-log or a cache/tb-page

Be aware that the Profile you use on Garmin is not necesarily the same as the Routing activity. Check your routing setup once you have changed your ptofile: Setup - Routing - and select the correct mode. It is very easy to use e.g. Hiking Profile, with the Routing set to automotive ...