Interesting. How do I determine when it's past 35 so I can unblock the south and SW? It doesn't appear that the sats are being found in any order. Some on the top row show up, then some on the bottom and then another on top until things become static. The rightmost place holders on the bottom are 35 and 36 and 36 never lights up and the one immediately to the left of 35 shows up almost immediately when I turn on the machine. So, I don't know how to determine then the sequence is past 35 since nothing higher than that lights up. Am I correct in assuming that if I find 48 and 51 then those two numbers will appear in the rightmost positions? Won't this thing find any and all sats it can? So, if I get it past 35, when I uncover the S and SW areas to get 48 and 51, won't the machine again find 35 and begin taking info from it?
After reading this thread, I tried it with my GPS V. What I did was the reset(power and menu buttons together) then menued in to enable WAAS. I then put my hand over the antenna and watched all the satellites come on. When 35 showed an indication of being picked up I moved my hand til it went bank. Then in 1 minute increments, the receiver starting picking up the satellites one by one. each one showing in the space immediately right of 35. Eventually I got to 48, ( 12 minutes) and after 1 minute it jumped to 51 and locked on. It now indicates both 35 and 51 but only is getting data from 51..
Takes a lot of patience and I'm not a patient person.. Actually took me 3 tries to make it work.