M&Ma
-
Posts
4 -
Joined
-
Last visited
Posts posted by M&Ma
-
-
I've been searching for the same information for my Crossover. I was able to do it one time with the use of GSAK and GPSBabel but have not been able to figure out a repeat performance. Any ideas would help.
I'm pretty sure that GSAK uses GPSBabel in the background. Did you use both of these programs separtely?
Did the waypoints go in as the waypoint code (i.e. GC10EXZ) or as the description (i.e. A Walk In The Park)?
Are you using firmware 1.68 in your Crossover?
-
I have a Magellan Crossover and have been able to load .gpx files from this site into it as POI's, but I would also like to have them loaded as waypoints. I'm thinking that I should be able to use Vehicle Nav to get close to the caches by car or bike and then switch to Outdoor and find the cache as a waypoint.
I know that I can enter them manually, but it sure would be nice if I could just do some sort of file conversion and then import them.
I've searched this site for "Magellan Crossover" and "Magellan Crossover & waypoints" looking for step by step instructions on how to do this but all I have found are vague instructions.
Can anyone provide detailed instructions or provide links on how to do this for the Magellan Crossover?
-
Downfall: GPSBabel creates a UPT file with the GC number as the name and the Description as the description. The unit only lists waypoints by their name.
Workaround: Manually load the UPT file and swap the two fields. You have to add the ending line of “$PMGNCMD,END*3D” anyways otherwise the UPT file won’t load.
How do you swap the two fields?
Magellan Crossover & waypoints
in How do I...?
Posted · Edited by M&Ma
Ok, I've been able to load caches into my Crossover as Waypoints in Outdoor (in addition to POI's loaded in Vehicle Nav) two times now and it's worked both times.
You need to make a file with a UTP filename extension. To do it, use GPSBabelGUI (for some reason it doesn't work using GSAK).
Open the program and under Input in the Format box select GPX/XML, in the File box type in the path and the filename of the gpx file that you want to create the .UPT file from.
Under Output in the Format box select Magellan SD files (as for eXplorist), in the File box type in the path and the filename of the upt file that you want to create. Note that the filename and the filename extension both need to be in capital letters. Select let's go and the file will be created.
Copy & Paste this file onto your SD card. Insert the card back into your Crossover, turn it on, press the reset button on the left hand side after it powers up. When the GPS is ready go to Outdoor/Options/Waypoints Options and choose Clear Waypoints.
Then scroll down to & choose Import Data. Select the file that you put on your SD card. The file should load and you should have the Waypoints loaded with their cache name (not their description) in Outdoor under Waypoints.