BikeBill
+Premium Members-
Posts
298 -
Joined
-
Last visited
Everything posted by BikeBill
-
<<There's also a tick box at the bottom of the page which says "press enter to send" (or something similar), untick that and you will have to click that big "Send" button to send... >> Thanks, MartyBartfast! I'll give that tip a try.
-
I like Geocaching's Messaging feature and use it quite a bit. One thing about it make me crazy: When I hit the 'Enter' key if I want to skip a space, the message sends. This often happens right after I address who the message is to or partway through when I want to start a paragraph. The message (or part of one) is gone without spell checking or checking grammar or whatever. I just sent a message that the recipient got in three parts due to this. Since there is a big 'Send' button at the bottom of the page, why does the message send with the 'Enter' key? I've talked to others who are also irked by this so it's not only me. (And, no, I don't want to relearn my keyboard skills).
-
More accurate GPS coming to smartphones
BikeBill replied to J Grouchy's topic in GPS technology and devices
Apparently there are a lot of L5 satellites up there already so L5 might be coming relatively soon. I wonder when we'll hear about Garmin jumping on the bandwagon. http://gpsworld.com/big-news-from-broadcom-30-cm-positioning-for-consumers/ -
I just did a check on software for my GPSMAP 64s and found that version 4.8 has been available as of a few weeks ago. Apparently it has some bug fixes. Anyone have any good or bad experiences with 4.8 so far? I just loaded it.
-
Make sure you didn't dislodge the SD card if you have one installed. Mine gets a little out of place from time to time and causes all kinds of trouble.
-
Perhaps you could have an electronic tech solder a new socket back onto the circuit board.
-
Garmin Waypoint Projection Question
BikeBill replied to BikeBill's topic in GPS technology and devices
Timpat: Great information about Mils! I went into setup and found that, which would have been tough without your instructions. I added the Mils information to my 'crib notes' in waypoint projection. Besides, adding a little more math to a puzzle just enhances the challenge! Viajera: I like your solution, too. -
I did a field puzzle today that required projecting from a waypoint. I keep 'crib notes' on my phone so I remember how to do this as it required changing profiles, etc., and I rarely have to do projection. Anyway, the bearing I was to project was 35.3 degrees. This is when I discovered that my Garmin 64s only projects whole degrees, not decimals. That is, unless I was doing something wrong. I tried entering 35 then 'shift' and a period but it wouldn't take. Does the 64s only let the user enter bearings as whole degrees or am I doing something wrong? I saw nothing in the manual. I found the cache anyway and using 35 degrees was close enough, as it wasn't a huge distance. If I was dealing with miles and not a few hundred feet, it would have been a problem.
-
Problem With GPSMAP 64s and Multi's
BikeBill replied to BikeBill's topic in GPS technology and devices
Dragging up an old topic here. It's been nearly a couple years since I originally posted my complaint about my 64s locking up when loading more than one additional waypoint for a multi. Has anyone found a way to fix or get around the problem? I haven't had my 64s lock up like that since, let me think, TODAY! Twice! -
Garmin 64s Shows Caches On List But Not On Map
BikeBill replied to BikeBill's topic in GPS technology and devices
Thanks, Timpat. I'll give that a try. -
Garmin 64s Shows Caches On List But Not On Map
BikeBill replied to BikeBill's topic in GPS technology and devices
I should have explained myself better. I'm aware of the zoom setting issue and have it adjusted accordingly. My problem is that I might have 20 caches showing up on the map but one will be missing - but it will show up on the list page. My buddy's Etrex will be showing it just fine. -
Garmin 64s Shows Caches On List But Not On Map
BikeBill posted a topic in GPS technology and devices
This has happened several times with my 64s: I'm in an area where I know there's a cache. The cache does not show up as an icon on the map page. I switch to the list page and there it is on the list. When I select it and go back to the map page, there it is. Anyone else experience this? Is there a solution? -
Garmin Oregon 6XX and GPSMap 64x Firmware Upgrades
BikeBill replied to BikeBill's topic in GPS technology and devices
JohnCNA wrote: << I see that they have labelled it as "optional MTP" mode, so I hope they do not make it the default transfer mode.>> It appears not to be made default after the firmware update. I plugged my Oregon into my Win 10 laptop after the upgrade and all functioned as it did before. -
I was fiddling with my seldom used Oregon 600 today to see if I could find anything (like custom symbols) that would cause it's annoying crashes. While hooked up to my PC I realized that there was a firmware upgrade available, V 5.0, so I upgraded. While at it, I plugged in my trusty GPSMap 64s to find that it also had a firmware update available: v. 4.5. Both these updates are to enable the devices to use Media Transfer Protocol (MTP) which I know nothing about. Can someone explain what this is? My hope is that the new firmware versions have other fixes in them that will help with the 600's crashing problem. My 64s is pretty stable unless I try to load more than one additional stage of a multi into it, then it crashes, too. I don't know when these firmware versions became available as there were no dates shown with them on Garmin's site. I apologize if this is old news.
-
Oregon 6xx Owners, A Question or Two
BikeBill replied to MtnHermit's topic in GPS technology and devices
I've had the same experiences with the 600 as the A-Team. Crashes and walk-backs. The crashes I could put up with but frequently having to walk back to the cache to find my caching buddies already found it was too much. The 600 currently resides in a drawer and I'm much much happier with the 64s that I purchased. I'm keeping the 600 in the hope that they do a firmware update that fixes the darn thing, but my hope for that is fading as time goes by. -
so what seems to be the standard GPS workhorse now?
BikeBill replied to TEAM HARTSOCK's topic in GPS technology and devices
<<watching some review vids of the 64...>> At the risk of starting an argument, I'd pay a little more and go with the 64s over the base 64. If nothing else, the 3-axis compass is handy for geocaching. -
so what seems to be the standard GPS workhorse now?
BikeBill replied to TEAM HARTSOCK's topic in GPS technology and devices
I too, started with a 60CSx. After a few years and one refurbished replacement I decided to try the new (at the time) Oregon 600. I didn't like it for a number of reasons. I bit the bullet and bought a 64s and have been happy since. Don't expect to fire it up and go caching without some head-scratching, though. The 64s Looks a lot like the 60CSx but it operates substantially differently. Read the manual, ask questions here and things will be good. -
A similar process works for Firefox.
-
Oregon 6x0 (WebUpdater) software version 4.80
BikeBill replied to mjr15197's topic in GPS technology and devices
<<While out caching yesterday, the GPS locked up on me several times, requiring a battery pull to get it working again.>> That's not unusual behavior for mine, ever since new. That's a reason my 600 is in a drawer and I generally use my 64s. -
Oregon 6x0 (WebUpdater) software version 4.80
BikeBill replied to mjr15197's topic in GPS technology and devices
Can anyone that did the update give a report? For example, any improvement in accuracy? -
A few days ago ran into Firefox suddenly not accepting Garmin Communicator as an plug-in in Win 10 (v. 1511). After messing with it for a while, I went to Firefox add-ons, then found 'Garmin Communicator v 4.1.0.1-signed' on the Firefox list. It loaded fine and now I can 'write' directly to my Garmin 64s from a cache page. I didn't read every work of every post above, so if this was addressed before I apologize.
-
You'll probably get lots of replies on this but you are correct in that the basemap is very, uh, basic. You can spring for additional Garmin maps, use Open Street Maps or explore other options. I have my Garmins loaded with free topo maps from GPSFileDepot, http://www.gpsfiledepot.com/ I've been very happy with their accuracy and features. Getting them from the website into your 650 will be a bit of a chore but it's not too bad.
-
Wesi: I broke my 60CSx in a similar fashion to the way you broke yours, but not quite as bad. This was a few years ago when you could still send that model back to Garmin and get a refurb for $100, so that's what I did. Then I upgraded to an Oregon 600, didn't like it, and went to a 64s. I'm very happy with the 64s! Definitely a leaning curve as the operating interface is quite different, but it's a great caching unit and a nice upgrade over the 60CSx, which now lives in a drawer.
-
I'll pile on the 3GS with everyone else. Mine was terrible for caching. The best accuracy I could get out of it was about 60 feet. My iPhone 4 was a big improvement and the iPhone 6 I currently own is nearly as accurate as my Garmin 64s (though, unlike the Garmin, I can't drop it in a creek).